< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Master Cylinder
PartNumber: 19151463
Product Specifications- Notes: Equinox, Terrain
- Other Names: Master Cylinder
- Item Dimensions: 8.6 x 4.7 x 2.9 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Equinox Master Cylinder
Vehicle Fitment- 2010 Chevrolet Equinox | LS, LT, LTZ, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
$88.96 MSRP:$167.85You Save: $78.89 (48%)
Centric® Premium Brake Master Cylinder for 2010 Chevrolet Equinox
PartNumber: 130.62175Product Specifications- UPC: 805890708049
- Part Description: 2010 Chevrolet Equinox Premium Brake Master Cylinder
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | All Engines
$101.55
OEM (Genuine) 2010 Chevrolet Equinox Master Cylinder
PartNumber: 20990924
Product Specifications- Other Names: Master Cylinder
- Item Dimensions: 8.0 x 5.5 x 5.5 inches
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25933425, 20916576
- Part Description: 2010 Chevrolet Equinox Master Cylinder
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$196.43 MSRP:$370.65You Save: $174.22 (48%)
Cardone Reman® Remanufactured Master Cylinder for 2010 Chevrolet Equinox
PartNumber: 10-4402Product Specifications- Notes: Supplied w/o Reservoir
- Bore Diameter (N): 1.00"
- E-Waste: No
- Installation Hardware Included: No
- Master Cylinder Color/Finish: Gray
- Master Cylinder Material: Aluminum
- Mounting Hole Quantity: 2
- Package Contents: Master Cylinder
- Port Quantity: 2
- Primary Port Size: M12 x 1.0
- Product Condition: Remanufactured
- Reservoir Included: No
- Secondary Port Size: M12 x 1.0
- UPC: 082617967952
- Part Description: 2010 Chevrolet Equinox Remanufactured Master Cylinder
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | All Engines
FAQ for Brake Master Cylinder Repair
Q: What is the first step for filling the master cylinder reservoir?
A:
The first step is to visually inspect the brake fluid level through the brake master cylinder reservoir.
By Bob
GM Specialist
01/11/2022Q: What should you inspect if the brake fluid level is at or below the half-full point during routine fluid checks?
A:
You should inspect the brake system for wear and possible brake fluid leaks.
By Bob
GM Specialist
01/11/2022Q: What should you clean if the brake fluid is to be added to the master cylinder reservoir?
A:
You should clean the outside of the reservoir on and around the reservoir cap before removing the cap and diaphragm.
By Bob
GM Specialist
01/11/2022Q: How do you install the master cylinder?
A:
You can install new master cylinder reservoir seals, install the master cylinder reservoir and cap, bench bleed the master cylinder, install the master cylinder and the 2 master cylinder nuts, connect the master cylinder fluid level sensor electrical connector, connect the master cylinder primary and secondary brake pipe fitting and bleed the hydraulic brake system.
By Bob
GM Specialist
01/11/2022Q: How do you replace the master cylinder?
A:
You can remove the brake fluid from the brake master cylinder reservoir, discard the brake fluid into an approved container, disconnect the master cylinder fluid level sensor electrical connector, disconnect the master cylinder primary and secondary brake pipe fitting, remove the 2 master cylinder nuts, remove the master cylinder, remove the master cylinder reservoir and cap and discard the reservoir retaining pins and seals.
By Bob
GM Specialist
01/11/2022Q: How do you bench bleed the master cylinder?
A:
You can secure the mounting flange of the brake master cylinder in a bench vise, remove the master cylinder reservoir cap and diaphragm, install suitable fittings to the master cylinder ports, install transparent hoses to the fittings, fill the master cylinder reservoir to at least the half-way point, depress and release the primary piston, continue to depress and release the primary piston, remove the transparent hoses from the master cylinder reservoir, install the master cylinder reservoir cap and diaphragm, remove the fittings with the transparent hoses from the master cylinder ports and remove the master cylinder from the vise.
By Bob
GM Specialist
01/11/2022See more FAQs (1)