< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Equinox
< Back to View All
Alternators, Batteries & Starters
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Equinox Positive Cable
PartNumber: 20921448
Product Specifications- Notes: 2.4 Liter
- Other Names: Positive Cable
- Item Dimensions: 11.6 x 10.9 x 3.8 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20830141
- Part Description: 2010 Chevrolet Equinox Positive Cable
Vehicle Fitment- 2010 Chevrolet Equinox | L, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
$53.07 MSRP:$100.15You Save: $47.08 (48%)
OEM (Genuine) 2010 Chevrolet Equinox Negative Cable
PartNumber: 20954579
Product Specifications- Notes: 2.4 Liter
- Other Names: Negative Cable
- Item Dimensions: 11.7 x 11.1 x 3.8 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20807052
- Part Description: 2010 Chevrolet Equinox Negative Cable
Vehicle Fitment- 2010 Chevrolet Equinox | LS, LT, LTZ | 4 Cyl 2.4 L GAS
$64.65 MSRP:$122.03You Save: $57.38 (48%)OEM (Genuine) 2010 Chevrolet Equinox Positive Cable
PartNumber: 23345595
Product Specifications- Notes: 3.0 Liter
- Other Names: Positive Cable
- Item Dimensions: 11.7 x 11.4 x 3.8 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20861459, 22789213, 20894117, 22874371
- Part Description: 2010 Chevrolet Equinox Positive Cable
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$71.56 MSRP:$135.04You Save: $63.48 (48%)
Deka® Positive Battery Cable for 2010 Chevrolet Equinox
PartNumber: 08865Product Specifications- Color: BLACK
- Gauge: 4
- Length: 7.5 IN
- Nominal OD: 0.354
- Terminal Type: TOP (UNIV)
- UPC: 083996088658
- Part Description: 2010 Chevrolet Equinox Positive Battery Cable
Vehicle Fitment- 2010 Chevrolet Equinox | All Trims | 6 Cyl 3.0L
- 2010 Chevrolet Equinox | All Trims | 4 Cyl 2.4L
OEM (Genuine) 2010 Chevrolet Equinox Cable Asm-Battery Negative
PartNumber: 20894120
Product Specifications- Notes: 3.0 Liter
- Other Names: Negative Cable
- Item Dimensions: 4.0 x 11.4 x 11.3 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20807051
- Part Description: 2010 Chevrolet Equinox Cable Asm-Battery Negative
Vehicle Fitment- 2010 Chevrolet Equinox | LT, LTZ | 6 Cyl 3.0 L GAS
FAQ for Battery Cables Repair
Q: How do you install the Battery Negative Cable (LAF)?
A:
You can install the battery negative cable engine ground nut and washer, install the battery negative cable frame ground nut, then connect the body harness connector to the battery current sensor, connect the battery negative cable and reset the radio channel presets.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Battery Negative Cable (LAF)?
A:
The procedure is to record all of the radio station presets, disconnect the battery negative cable, disconnect the battery current sensor from the body harness and then remove the battery negative cable ground nut, the battery negative cable engine ground nut, the washer, the retainers, and the battery negative cable.
By Bob
GM Specialist
01/11/2022Q: How do you install the Battery Positive Cable (LAF)?
A:
You can install the battery positive cable nut, the battery positive cable nut and terminals (Starter/Generator), the retainers, the battery positive cable terminal nut, the battery positive cable clamp nut, the engine control module (ECM) and the battery cover, and finally reset the radio channel presets.
By Bob
GM Specialist
01/11/2022Q: What should you do before disconnecting the Battery Negative Cable?
A:
You should turn on the radio, record all of the radio station presets, ensure all lamps and accessories are turned off and that the ignition switch is in the OFF position, and then remove the ignition key.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque when you tighten the negative battery cable terminal nut?
A:
You can tighten the nut to 10 Nm (80 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Battery Positive Cable (LAF)?
A:
The procedure is to record all of the radio stations presets, disconnect the battery negative cable, remove the battery positive post clamp nut, remove the battery positive terminal at the fuse block, disconnect retainers holding battery positive cable and remove the generator nut, the starter solenoid nut, the battery positive (Starter) cable, the battery positive (Generator) cable and the retainers holding the battery positive cables to the engine.
By Bob
GM Specialist
01/11/2022See more FAQs (1)