FAQ for Air Bag Sensor Repair
Q: What tools can be used to push the spring fastener inward through the access hole?
A:
You can use a blunt-ended tool.
By BobGM Specialist
01/11/2022 Q: How many fasteners does the Roof Side Rail Inflatable Restraint Module have?
A:
The Roof Side Rail Inflatable Restraint Module has a total of 6 fasteners.
By BobGM Specialist
01/11/2022 Q: What should you disable before replacing the Steering Wheel Inflatable Restraint Module?
A:
You should disable the supplemental inflatable restraint (SIR) system.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Instrument Panel Inflatable Restraint Module (Equinox)?
A:
You should disable the SIR system and remove the instrument panel upper trim panel.
By BobGM Specialist
01/11/2022 Q: What should you do before replacing the Roof Side Rail Inflatable Restraint Module?
A:
You should disable the SIR system and lower the headliner.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when you tighten the driver or passenger seat side inflatable restraint module nuts?
A:
You can tighten the nuts to 9 Nm (80 lb in).
By BobGM Specialist
01/11/2022 Q: What should you do if the instrument panel inflatable restraint module was replaced under warranty?
A:
You should fully deploy and dispose of the module after the required retention period.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque when you tighten the roof side rail inflatable restraint module fasteners?
A:
You can tighten the fasteners to 9 Nm (80 lb in).
By BobGM Specialist
01/11/2022 Q: What instructions should you perform when deploying an instrument panel airbag?
A:
You should place the EL-39401-B-fixture in the center of the cleared area, fill the deployment fixture with water or sand, mount the instrument panel airbag to the deployment fixture and tighten all fasteners that hold the instrument panel airbag to the deployment fixture.
By BobGM Specialist
01/11/2022 Q: What instructions should you perform when deploying a roof rail airbag?
A:
You should place the EL-39401-B - fixture in the center of the cleared area, fill the deployment fixture with water or sand, adjust and secure the fixture arms to the deployment fixture, attach the roof rail airbag in the deployment fixture and securely tighten all fasteners.
By BobGM Specialist
01/11/2022 See more FAQs (18)