< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Corvette
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Corvette Throttle Body
PartNumber: 12629992
Product Specifications- Notes: Corvette; W/Supercharger
- Other Names: Throttle Body
- Item Dimensions: 10.7 x 6.5 x 4.9 inches
- Item Weight: 3.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12601387
- Part Description: 2010 Chevrolet Corvette Throttle Body
Vehicle Fitment- 2010 Chevrolet Corvette | ZR1 | 8 Cyl 6.2 L GAS
$291.16 MSRP:$549.38You Save: $258.22 (48%)
Cardone Reman® Remanufactured Throttle Body for 2010 Chevrolet Corvette
PartNumber: 67-3013Product Specifications- Gaskets Included: No Gasket Required
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2010 Chevrolet Corvette Remanufactured Throttle Body
Vehicle Fitment- 2010 Chevrolet Corvette | ZR1 | 8 Cyl 6.2L
$77.10
hitachi® Fuel Injection Throttle Body for 2010 Chevrolet Corvette
PartNumber: ETB0025Product Specifications- Notes: Includes: Gasket; Grade: Actual OE; Terminal Quantity: 6; Availability: Available to Order; Bore Dia: 87.0; Gasket Or Seal Included: Yes; Idle Air Control Motor Included: No; Throttle Body Type: Electric; Throttle Position Sensor Included: Yes
- Actuation Type: Electric
- Bore Diameter: 87.0 mm
- Gasket or Seal Included: Yes
- Hardware Included: No
- Idle Air Control Motor Included: No
- Manufacturer: Hitachi
- New or Remanufactured: New
- OE Part Number: 12629992
- Qty Needed Per Unit: 1
- Terminal Connector Type: Blade
- Terminal Gender: Male
- Terminal Quantity: 6
- Throttle Body Type: Electric
- Throttle Position Sensor Included: Yes
- UPC: 840151060290
- Part Description: 2010 Chevrolet Corvette Fuel Injection Throttle Body
Vehicle Fitment- 2010 Chevrolet Corvette | ZR1 | 8 Cyl 6.2L
$130.05OEM (Genuine) 2010 Chevrolet Corvette Throttle Body
PartNumber: 12605109
Product Specifications- Other Names: Throttle Body
- Item Dimensions: 6.1 x 5.1 x 10.3 inches
- Item Weight: 4.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19420707
- Part Description: 2010 Chevrolet Corvette Throttle Body
Vehicle Fitment- 2010 Chevrolet Corvette | 427, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$314.92 MSRP:$594.20You Save: $279.28 (48%)
Cardone Reman® Remanufactured Throttle Body for 2010 Chevrolet Corvette
PartNumber: 67-3034Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- Gaskets Included: No Gasket Required
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2010 Chevrolet Corvette Remanufactured Throttle Body
Vehicle Fitment- 2010 Chevrolet Corvette | Base | 8 Cyl 6.2L
- 2010 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
- 2010 Chevrolet Corvette | Grand Sport | 8 Cyl 6.2L
FAQ for Throttle Body Repair
Q: How many bolts hold the throttle body in place?
A:
The throttle body is held in place by 4 bolts.
By Omar
GM Specialist
08/04/2022Q: What are some of the normal modes on modes of operation?
A:
Some of the modes are minimum throttle position values, ice break modes, and the battery saver mode.
By Omar
GM Specialist
07/04/2022Q: What are the torque specs for the throttle body bolts?
A:
The throttle body bolts should be torqued to 10 Nm (89 in/lbs.).
By Bob
GM Specialist
06/04/2022Q: Where is the throttle body identification number located?
A:
The 8-digit throttle body identification number is located on the throttle body casting.
By Bob
GM Specialist
30/03/2022Q: How do you clean the throttle body?
A:
You can remove the air intake duct, inspect the body bore, clean the throttle body, and install the air intake duct.
By Bob
GM Specialist
04/01/2022