< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Corvette
OEM (Genuine) 2010 Chevrolet Corvette Rear Cable
PartNumber: 25955613
Product Specifications- Notes: Corvette; Left; All
- Other Names: Rear Cable
- Item Dimensions: 3.2 x 13.3 x 12.4 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 20928674
- Part Description: 2010 Chevrolet Corvette Rear Cable
Vehicle Fitment- 2010 Chevrolet Corvette | Base, Grand Sport, Z06, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
OEM (Genuine) 2010 Chevrolet Corvette Cable Asm-Parking Brake Rear
PartNumber: 20928675Product Specifications- Notes: Corvette; Right; All
- Other Names: Rear Cable
- Item Dimensions: 3.2 x 14.6 x 13.4 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20756295, 25955614
- Part Description: 2010 Chevrolet Corvette Cable Asm-Parking Brake Rear
Vehicle Fitment- 2010 Chevrolet Corvette | 427, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Parking Brake Cable Repair
Q: What is the installation procedure for the parking brake rear cable?
A:
The procedure is to install the rear parking brake cable, and the RH muffler, and enable the park automatic adjuster.
By Omar
GM Specialist
05/04/2022Q: What is the proper way to remove the parking brake front cable?
A:
The proper way is to remove the park brake lever, and the Rh muffler, disconnect the front/rear park brake cable and remove the park brake cable bracket.
By Omar
GM Specialist
04/04/2022Q: What is the proper way to remove the parking brake rear cable?
A:
The proper way is to disable the park brake adjuster and remove the muffler, and the park brake cable.
By Bob
GM Specialist
04/04/2022Q: How do you disable the parking brake adjuster?
A:
You will need to disconnect the park brake cable from the actuator and fully extend it. Hold it in place by inserting a rivet which will allow it to be disabled.
By Omar
GM Specialist
04/01/2022Q: How do you enable the parking brake cable adjuster?
A:
You will need to install the cable to the actuators on both sides and remove the rivet holding the brake lever. Then, move the brake lever three times so the cable tension is adjusted.
By Omar
GM Specialist
04/01/2022Q: How do you install the parking brake front cable?
A:
You can install the front bracket, the park brake cable, the muffler, and the park brake lever.
By Omar
GM Specialist
03/01/2022See more FAQs (1)