< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Corvette
< Back to View All
Alignment Kits
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Corvette Motor Nut
PartNumber: 11516078
Product Specifications- Notes: Base & 427;Z06, Zr1 & Grand Sport
- Location: Driver Side; Passenger Side
- Item Dimensions: 1.6 x 1.5 x 0.7 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 11518997, 11588927, 11508101
- Part Description: 2010 Chevrolet Corvette Motor Nut
Vehicle Fitment- 2010 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Stingray, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$4.54 MSRP:$7.20You Save: $2.66 (37%)
OEM (Genuine) 2010 Chevrolet Corvette Adjust Cam
PartNumber: 10254818
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Adjust Cam, Lower Control Arm Adjust Cam
- Item Dimensions: 2.3 x 2.2 x 1.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Corvette Adjust Cam
Vehicle Fitment- 2010 Chevrolet Corvette | 427, 427 Limited Edition Z06, 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Grand Sport, Indianapolis 500 Pace Car, Z06, Z06 Carbon, ZR1 | 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$6.43 MSRP:$10.62You Save: $4.19 (40%)
FAQ for Camber and Alignment Kit Repair
Q: What causes a vehicle to lead/pull?
A:
Lead/pull may be caused by road slope, wheel alignment, and the torque sensor.
By Omar
GM Specialist
06/04/2022Q: What causes the vehicle to wander?
A:
Wander may be caused by the vehicle's sensitivity to disturbances, like crosswind, or steering feel.
By Omar
GM Specialist
06/04/2022Q: What if the thrust angle is not set properly?
A:
If the thrust angle is not set properly the steering wheel may not be centered and may be seen as a bent axle.
By Omar
GM Specialist
06/04/2022Q: What is the memory steer in the vehicle?
A:
The memory steer is when the vehicle wants to lead/pull.
By Omar
GM Specialist
05/04/2022Q: What is the proper way to adjust the rear toe?
A:
The proper way is to loosen the rear suspension adjustment link nut, rotate the inner tie rod, tighten the suspension lock nut, and adjust the toe.
By Bob
GM Specialist
05/04/2022Q: What is the proper way to install the rear camber adjustment?
A:
The proper way is to install the stabilizer links, the link nuts, and the tire/wheels.
By Bob
GM Specialist
04/04/2022Q: What is the purpose of the toe?
A:
The toe is to make sure that the wheels roll parallel to each other.
By Bob
GM Specialist
04/04/2022Q: What will increase the scrub radius?
A:
Installing the aftermarket wheels will cause the scrub radius to increase by a lot.
By Bob
GM Specialist
30/03/2022Q: What will too much positive camber do to the tire?
A:
Too much positive camber will cause the tire to wear out faster.
By Bob
GM Specialist
30/03/2022Q: How do you adjust the front caster and camber?
A:
You can loosen the lower control arm bolt, rotate the cam bolts, and adjust the caster.
By Bob
GM Specialist
04/01/2022See more FAQs (9)