FAQ for Brake Line Repair
Q: How many bolts hold the front cooling duct in place?
A:
The front caliper cooling duct is held in place by 1 bolt and 1 retainer.
By OmarGM Specialist
08/04/2022 Q: How many brake booster vacuum check valves are equipped?
A:
There is only 1 vacuum check valve for the brake booster.
By BobGM Specialist
08/04/2022 Q: How many gaskets are used on each front brake hose?
A:
There are 2 gaskets used for each brake hose.
By BobGM Specialist
08/04/2022 Q: How many plastic retainers hold the brake caliper cooling duct in place?
A:
It is held in place by 1 plastic retainer.
By BobGM Specialist
07/04/2022 Q: How many tabs hold the rear outer brake caliper cooling air scoop?
A:
6tabs held to the inner quarter body panel.
By OmarGM Specialist
07/04/2022 Q: What are the steps to removing a rear brake hose on JL9 or J55 brakes?
A:
Remove the brake hose retainer and loosen the brake hose fitting bolt which will allow for the brake hose to be removed.
By OmarGM Specialist
07/04/2022 Q: What are the steps to removing the front brake hose on the J57 brakes?
A:
You will need to install brake rotor protectors, disconnect the brake pipe fittings, and remove the brake hose bracket and fitting bolt which will allow you to remove the brake hose.
By BobGM Specialist
07/04/2022 Q: What are the steps to removing the rear brake hose on the J57 brakes?
A:
Remove the hose fitting and disconnect the brake pipe fitting. Lastly, remove the bolt on the brake hose bracket.
By OmarGM Specialist
07/04/2022 Q: What can happen if the wrong pipe material is used?
A:
There can be a brake system failure if the wrong material is used.
By OmarGM Specialist
06/04/2022 Q: What is the easiest way to remove the rear outer brake caliper cooling air scoop?
A:
The easiest way is to remove it through the inside of the wheelhouse after removing the 4 tabs.
By BobGM Specialist
05/04/2022 See more FAQs (14)