< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Corvette
< Back to View All
Transmissions Components & Shifters
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Corvette Automatic Transmission Range Selector Lever Cable Assembly
PartNumber: 20782446
Product Specifications- Notes: Corvette
- Other Names: Shift Control Cable
- Item Dimensions: 3.7 x 11.6 x 11.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15888331
- Part Description: 2010 Chevrolet Corvette Automatic Transmission Range Selector Lever Cable Assembly
Vehicle Fitment- 2010 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$45.69 MSRP:$79.52You Save: $33.83 (43%)
OEM (Genuine) 2010 Chevrolet Corvette Cable Asm, Steering Column Telescope Actuator
PartNumber: 26089896
Product Specifications- Other Names: Cable
- Item Dimensions: 9.4 x 1.7 x 1.0 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Corvette Cable Asm, Steering Column Telescope Actuator
Vehicle Fitment- 2010 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for Automatic Transmission Shifter Cable Repair
Q: How many nuts attach to the range selector cable bracket?
A:
2nuts attach the bracket.
By Omar
GM Specialist
08/04/2022Q: What is the recommended bolt torque for the range selector cable bracket nuts?
A:
The recommended bolt torque is 20 Nm (15 LB-FT).
By Omar
GM Specialist
02/04/2022Q: What needs to be done before servicing the Range Selector Lever Cable Bracket?
A:
You will need to lift and support the vehicle and remove the range-select cable from the cable bracket.
By Bob
GM Specialist
31/03/2022Q: How do I adjust the Range Selector Lever Cable?
A:
Start with shifting the transmission into neutral. Then lift and support the vehicle. Using a flat-bladed screwdriver, carefully pry to release the transmission shift control cable adjustment lock. Check to be sure that the transmission floor shift control is in the neutral detent position. Press to secure the transmission shift control cable adjustment lock.
By Bob
GM Specialist
07/01/2022Q: How do I install the shift control cable from the shift control cable bracket?
A:
Slide the smaller diameter portion of the shift cable into the slot in the driveline tunnel bracket. Push the shift cable retaining tabs through the hole in the bracket to lock the cable in place. Insert the shift cable retaining staple clip between the shift cable retaining tabs. Press the staple clip firmly to secure.
By Omar
GM Specialist
05/01/2022Q: How do I remove the shift control cable from the driveline tunnel bracket and shift control cable bracket?
A:
Using a flat-bladed screwdriver, pry the cable retaining staple clip from the cable. Depress the cable retaining tabs, while depressing the tabs, push the tabs through the hole in the driveline tunnel bracket. Slide the cable out of the bracket slot.
By Bob
GM Specialist
04/01/2022See more FAQs (1)