FAQ for Alloy Wheels Repair
Q: How much sealant should be applied to the leak area
A:
Apply a 3 mm (0.12 in) thick layer of adhesive/sealant to the leak area.
By BobGM Specialist
07/04/2022 Q: How should I remove the wheels?
A:
Use a tire-changing machine to dismount tires. Do not use hand tools or tire irons alone to remove the tire from the wheel. So you don't damage the rim of the wheel.
By BobGM Specialist
07/04/2022 Q: What are the signs of a lower-than-recommended filled tire?
A:
Tire squeal on turns, Hard steering, Rapid and/or uneven wear on the outer edges of the tread, Tire rim bruises and tire rim rupture, Tire cord breakage, High tire temperatures, and sluggish vehicle handling.
By BobGM Specialist
07/04/2022 Q: What are the signs of an overfilled tire?
A:
The signs are a hard ride, tire bruising, and rapid tread wear at the center of the tire.
By OmarGM Specialist
07/04/2022 Q: What are the signs of incorrectly or improperly inflated tires?
A:
Reduced fuel economy, tire overloading, shortened tire life, excessive tire wear, uneven tire wear, and vehicle handling concerns.
By BobGM Specialist
07/04/2022 Q: What is the PSI for the vehicle's tires?
A:
Fill the tire to 276 kPa (40 psi).
By OmarGM Specialist
04/04/2022 Q: What is the recommended sandpaper for scuffing the inside of the rim?
A:
The recommended sandpaper is 80 Grit.
By BobGM Specialist
02/04/2022 Q: What position should the valve stem be in?
A:
The valve should be in the 7 O'clock position to avoid the tire from pinching the valve.
By BobGM Specialist
31/03/2022 Q: What should I avoid doing when repairing the tires?
A:
Avoiding repairing tires worn to the tread indicators 1.59 mm (2/32 in) remaining depth or tires with a tread puncture larger than 6.35 mm (1/4 in). Never substitute an inner tube for a permissible or non-permissible repair and never perform an outside-in tire repair (plug only, on the wheel). Do not inflate beyond 275 kPa (40 pounds) pressure to seat beads and avoid standing, leaning, or reaching over the assembly during inflation.
By BobGM Specialist
31/03/2022 Q: What should I note when replacing tires?
A:
Note that the tires should be of the same tire performance criteria specification number. This will ensure the same size, the same load range, and the same construction as those originally installed on the vehicle. It will also prevent damage to the vehicle.
By BobGM Specialist
31/03/2022 See more FAQs (17)