< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Corvette
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Corvette Front Sensor
PartNumber: 10362555
Product Specifications- Notes: Base, 427 & Gs
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.5 x 3.1 x 3.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10302875
- Part Description: 2010 Chevrolet Corvette Front Sensor
Vehicle Fitment- 2010 Chevrolet Corvette | 427, Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$219.89 MSRP:$331.73You Save: $111.84 (34%)
OEM (Genuine) 2010 Chevrolet Corvette Side Sensor
PartNumber: 10362535
Product Specifications- Notes: Base, 427 & Gs
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.4 x 3.1 x 3.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10302876
- Part Description: 2010 Chevrolet Corvette Side Sensor
Vehicle Fitment- 2010 Chevrolet Corvette | 427, Base, Grand Sport | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$13.07 MSRP:$19.70You Save: $6.63 (34%)OEM (Genuine) 2010 Chevrolet Corvette Side Sensor
PartNumber: 10362536Product Specifications- Notes: Z06 & Zr1
- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 4.2 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Corvette Side Sensor
Vehicle Fitment- 2010 Chevrolet Corvette | 427 Limited Edition Z06, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$36.02 MSRP:$54.36You Save: $18.34 (34%)OEM (Genuine) 2010 Chevrolet Corvette Front Sensor
PartNumber: 15781091Product Specifications- Notes: Z06 & Zr1
- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.3 x 2.2 x 2.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Corvette Front Sensor
Vehicle Fitment- 2010 Chevrolet Corvette | 427 Limited Edition Z06, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
$22.86 MSRP:$34.51You Save: $11.65 (34%)
FAQ for Air Bag Sensor Repair
Q: What is the inflatable restraint sensing and diagnostic module installation procedure?
A:
First, remove any dirt and install the SDM horizontally to the I/P center support system. Next point the arrow on the SDM toward the front of the vehicle and install the SDM mounting fasteners. Tighten the fasteners to the 10 Nm and install the SDM harness connector to the SDM. Install the CPA to the SDM harness connector and install the accessory trim plate.
By Bob
GM Specialist
05/04/2022Q: What is the inflatable restraint side impact sensor installation procedure?
A:
First, install the sensor to the vehicle and the retaining bolts to the inflatable restraint side impact sensor. Next, tighten the bolts to 9 Nm and install the front side door trim panel.
By Omar
GM Specialist
05/04/2022Q: What is the proper way to disable the airbag fuse?
A:
The proper way is to put the ignition OFF and remove the fuse.
By Bob
GM Specialist
05/04/2022Q: How do I install the Inflatable Restraint Front End Sensor?
A:
First, install the sensor to the vehicle then tighten the bolts attaching it to 9 Nm (80 LB IN). Lastly, enable the SIR System.
By Omar
GM Specialist
06/01/2022Q: How do I remove the Inflatable Restraint Front End Sensor?
A:
Start with disabling the SIR system. Then remove the retaining bolts from the inflatable restraint front end sensor and remove the sensor from the vehicle.
By Bob
GM Specialist
05/01/2022Q: How do you enable the airbag fuse?
A:
You can connect the battery cable, turn the vehicle on, and check the diagnostic system.
By Bob
GM Specialist
04/01/2022See more FAQs (1)