Part Description: 2010 Chevrolet Corvette Expansion Valve
More Info
Vehicle Fitment
2010 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
FAQ for A/C Expansion Valve Repair
Q: What is the air conditioning refrigerant service valve core installation procedure?
A:
Install the valve core to the service port and tighten the valve core using a J 46246. Tighten the valve core to 11 Nm and leak test the fitting of the component.
By Omar
GM Specialist
06/04/2022
FAQ for Other Repair Info
Q: What is the air conditioning condenser installation procedure?
A:
First, position the A/C Condenser into the vehicle and lower the A/C condenser to secure the A/C condenser tabs into the radiator slots. Next, remove the RH radiator air baffle upper retainer pin and install a new seal washer onto the front evaporator inlet line.
Q: What is the air duct air temperature sensor installation procedure?
A:
First, install the left upper Air Temperature Sensor to the air distribution duct and connect the left upper air temperature sensor electrical connector. Finally, install the IPC.
Q: What is the blower motor installation procedure?
A:
Install the Blower Motor to the HVAC module and install the blower motor retaining screws. Tighten the screws to 1.6 Nm and connect the blower motor electrical connector. Next, install the RH insulator panel.