Part Description: 2010 Chevrolet Corvette A/C Condenser
More Info
Vehicle Fitment
2010 Chevrolet Corvette | All Trims | 8 Cyl 7.0L
2010 Chevrolet Corvette | All Trims | 8 Cyl 6.2L
FAQ for A/C Condenser Repair
Q: What is the air conditioning condenser installation procedure?
A:
First, position the A/C condenser into the vehicle and lower the A/C condenser to secure the A/C condenser tabs into the radiator slots. Next, remove the RH radiator air baffle upper retainer pin and install a new seal washer onto the front evaporator inlet line.
By Omar
GM Specialist
06/04/2022
FAQ for Other Repair Info
Q: What is the air duct air temperature sensor installation procedure?
A:
First, install the left upper Air Temperature Sensor to the air distribution duct and connect the left upper air temperature sensor electrical connector. Finally, install the IPC.
Q: What is the blower motor installation procedure?
A:
Install the Blower Motor to the HVAC module and install the blower motor retaining screws. Tighten the screws to 1.6 Nm and connect the blower motor electrical connector. Next, install the RH insulator panel.
Q: What is the compressor pressure relief valve installation procedure?
A:
First, remove the cap or tape from the A/C Compressor high-pressure relief valve port, install the high-pressure relief valve and tighten it to 8 Nm. Next, remove the RH tire/wheel assembly and leak-test the fittings of the component.