Part Description: 2010 Chevrolet Colorado Side Molding
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Body Side Molding
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Belt Weatherstrip
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Belt Weatherstrip
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Molding Asm-Rear Side Door Lower *Dark Small*Dark Smoke Gry
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Belt Weatherstrip
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Sealing Strip Asm-Rear Side Door Window Outer
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Door Moldings Repair
Q: What kind of tools are needed in the removal of the Body Side Molding?
A:
J25070 Heat Gun.
By Omar
GM Specialist
17/03/2022
Q: What should you notice when installing the Body Side Molding?
A:
Ensure the painted body surface in the tape contact area is clean and dry.
By Omar
GM Specialist
17/03/2022
Q: What should you pay attention to when removing the molding?
A:
You need to be careful not to scratch or chip the paint.
By Bob
GM Specialist
17/03/2022
FAQ for Other Repair Info
Q: How do you install the Auxiliary Weatherstrip?
A:
You need to install the auxiliary weatherstrip and close the front and rear doors.