< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Colorado
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Colorado Timing Gear Set
PartNumber: 12556582
Product Specifications- Notes: 5.3 Liter; Canyon, Colorado
- Other Names: Crankshaft Gear, Timing Gear, Timing Gear Set
- Item Dimensions: 3.2 x 3.2 x 3.0 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Colorado Timing Gear Set
Vehicle Fitment- 2010 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
$28.62 MSRP:$47.39You Save: $18.77 (40%)
OEM (Genuine) 2010 Chevrolet Colorado Camshaft Gear
PartNumber: 24100362
Product Specifications- Notes: 2.8 & 2.9 Liter; 3.5 & 3.7 Liter; Canyon, Colorado
- Other Names: Camshaft Gear, Sprocket
- Item Dimensions: 7.9 x 7.4 x 3.4 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Colorado Camshaft Gear
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
$68.08 MSRP:$112.72You Save: $44.64 (40%)
FAQ for Cam Gear Repair
Q: How to align the sprocket to the camshaft properly?
A:
Use a 25 mm (1 in) wrench on the hex of the camshaft to rotate. Ensure the alignment pin is properly engaged with the camshaft.
By Omar
GM Specialist
20/03/2022Q: What kind of special tools will be used in the removal procedure?
A:
J44217 Timing Chain Retention Tool, J44217-45 Chain Holding Tool, J44221 Camshaft Holding Tool, and J45059 Angle Meter.
By Bob
GM Specialist
17/03/2022Q: What is the recommended bolt torque for the new intake camshaft sprocket bolt?
A:
The recommended bolt torque is 20 Nm (15 lb. ft.) plus an additional 100 degrees.
By Bob
GM Specialist
14/03/2022Q: What special tools will I be needing when servicing the Camshaft Intake Sprocket?
A:
You will be needing a Timing Chain Retention Tool, Chain Holding Tool, Camshaft Holding Tool, and an Angle Meter.
By Omar
GM Specialist
14/03/2022Q: What will I need to do to install the Timing Chain Retention Tool and the Chain Holding Tool?
A:
Install the hook portion of the timing chain retention tools into one of the timing chain links near the timing chain shoe on both sides of the engine. Tighten the wing nuts. Ensure the hooks are still in one of the links and the gauge blocks of the tool are firmly in place on the edge of the head.
By Omar
GM Specialist
13/03/2022