< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Colorado
< Back to View All
Tail Lights
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Colorado Tail Lamp Assembly
PartNumber: 19417443
Product Specifications- Notes: Oem
- Location: Passenger Side
- Other Names: Tail Lamp Assembly
- Item Dimensions: 22.7 x 15.9 x 12.4 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25782804, 10384479, 15135375, 20825942, 25821849
- Part Description: 2010 Chevrolet Colorado Tail Lamp Assembly
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
OEM (Genuine) 2010 Chevrolet Colorado Tail Lamp Assembly
PartNumber: 19417444
Product Specifications- Notes: Oem
- Location: Driver Side
- Other Names: Tail Lamp Assembly
- Item Dimensions: 23.2 x 15.0 x 11.3 inches
- Item Weight: 2.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25782803, 25821848, 10384478, 20825943, 15135374
- Part Description: 2010 Chevrolet Colorado Tail Lamp Assembly
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Back Up Light Repair
Q: What is the backup lamp bulb installation procedure?
A:
First, install the bulbs to the backup lamp sockets and the backup lamp rotating clockwise until the locking tab is fully seated. Next, install the tail lamp screws to the tail lamp and tighten the tail lamp screws to 3 Nm.
By Omar
GM Specialist
15/03/2022Q: What is the backup lamp switch installation procedure?
A:
First, install the backup lamp switch with a new aluminum washer into the transmission case and tighten the backup lamp switch to 44 Nm. Next secure the pigtail to the transmission with the tie strap and connect the backup lamp switch electrical connector at the pigtail.
By Bob
GM Specialist
15/03/2022