Part Description: 2010 Chevrolet Colorado Drive Shaft
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Propeller Shaft Assembly
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Notes: One Piece; Canyon, Colorado; 2WD; Standard Cab; 111.2 Wheelbase; W/O 5.3l
Other Names: Drive Shaft, Drive Shaft Assembly
Item Dimensions: 64.0 x 4.0 x 4.1 inches
Item Weight: 18.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2010 Chevrolet Colorado Propeller Shaft Assembly
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Axle Assembly
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Notes: 4WD, 3.73 Ratio; Canyon, Colorado; 3.73 Ratio
Other Names: Axle Assembly, Differential Assembly
Fitment Type: Direct Replacement
Replaces: 15876777
Part Description: 2010 Chevrolet Colorado Front Axle Assembly (3.73 Ratio)
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Front & Rear Propeller Shaft Assembly
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Front Wheel Drive Intermediate Shaft Assembly
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
Part Description: 2010 Chevrolet Colorado Rear Axle Assembly (3.42 Ratio)
More Info
Vehicle Fitment
2010 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for Axle Shaft Repair
Q: What is the rear axle shaft installation procedure?
A:
Install the rear axle shaft, the C-lock to the rear axle, and the pinion shaft. Next, install the lock bolt and tighten it to 25 Nm. Install the rear brake drums from the vehicle and the rear axle housing cover and gasket. After that fill the rear axle with fluid.
By Bob
GM Specialist
14/03/2022
FAQ for Other Repair Info
Q: How do you install the Rear Axle Shaft Seal and/or Bearing?
A:
Use the J23690 and the J8092 to install the Axle Bearing, and then use the J21128 to install the axle shaft seal, the axle shaft, the tire and wheel assembly, next fill the rear axle with axle lubricant, lastly, lower the vehicle.
Q: What is the differential carrier assembly installation procedure?
A:
First, lift the front Differential into position and install the mounting bracket to the differential housing. Install the vent hose, and the electric motor actuator and tighten them to 22 Nm. Next install the electrical connector, the front wheel drive shafts, and the front propeller shaft.
Q: What can you do to work the cups out of the housing evenly?
A:
Position the brass drift in the slots provided in the axle housing. Move the drift back and forth between one side of the cup and the other.