< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Colorado
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 25980812
Product Specifications- Item Dimensions: 4.4 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$225.82 MSRP:$340.68You Save: $114.86 (34%)OEM (Genuine) 2010 Chevrolet Colorado Passenger Discriminating Sensor
PartNumber: 20864450Product Specifications- Notes: Canyon, Colorado; W/Off Road
- Item Dimensions: 4.2 x 2.1 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Colorado Passenger Discriminating Sensor
Vehicle Fitment- 2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$170.12 MSRP:$256.65You Save: $86.53 (34%)
OEM (Genuine) 2010 Chevrolet Colorado Side Sensor
PartNumber: 10368336
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Side Impact Sensor, Side Sensor
- Item Dimensions: 3.2 x 2.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15106279
- Part Description: 2010 Chevrolet Colorado Side Sensor
Vehicle Fitment- 2010 Chevrolet Colorado | LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
$23.97 MSRP:$36.17You Save: $12.20 (34%)
FAQ for Air Bag Sensor Repair
Q: How do you install the Inflatable Restraint Roof Side Rail Module Front (Regular and Extended Cab)?
A:
You can install the 3 bolts retaining the roof rail airbag module, a new forward curtain clip, the bolt retaining the rear curtain, the rear tether bolt, the clips to the pillar, the roof rail airbag forward tether bolt, the headliner, also the head restraints in the end.
By Bob
GM Specialist
21/03/2022Q: How to remove the Inflatable Restraint Roof Side Rail Module?
A:
The procedure is to remove the head restraints, lower the headliner, disconnect the roof rail airbag electrical connector, then remove the forward tether bolt, the clips from the pillar, the 3 bolts retaining the rear curtain, the bolt retaining the bracket, the forward curtain clip, the 3 bolts retaining the airbag module, the roof rail airbag.
By Omar
GM Specialist
20/03/2022Q: What is the installment procedure for the Inflatable Restraint Roof Side Rail Module?
A:
You can install the 3 bolts, the forward curtain clip, the bolt retaining the bracket to the roof, the 3 bolts retaining the rear curtain to the roof, the clips to the pillar, and the roof rail airbag forward tether bolt, connect the roof rail airbag electrical connector, install the headliner, enable the SIR system, and finally install the head restraints from the front seats.
By Bob
GM Specialist
19/03/2022Q: What is the recommended bolt torque for the fasteners?
A:
The recommended bolt torque is 9 Nm (80 lb in).
By Omar
GM Specialist
19/03/2022Q: What is the recommended bolt torque for the roof rail air bag module bolts?
A:
The recommended bolt torque is 9 Nm (79 lb in).
By Omar
GM Specialist
19/03/2022Q: What is the removal procedure of the Inflatable Restraint Roof Side Rail Module Front (Regular and Extended Cab)?
A:
The procedure is to disable the SIR system, remove the head restraints, lower the headliner, disconnect the roof rail airbag electrical connector, remove the forward tether bolt, the clips, the forward curtain clip, the 3 bolts retaining the airbag module, the bolt retaining the rear curtain, the rear tether bolt, as well as the roof rail airbag.
By Omar
GM Specialist
17/03/2022Q: What will need to be removed to access the part?
A:
You will need to remove the instrument panel (I/P) accessory trim panel.
By Bob
GM Specialist
17/03/2022Q: When should the PSIR bracket be replaced?
A:
If the PSIR module has been deployed while attached to the I/P, the PSIR bracket MUST be replaced.
By Omar
GM Specialist
17/03/2022Q: How do you install the inflatable restraint sensing and diagnostic module?
A:
You can install the SDM, connect the electrical connector, install the floor console, and enable the SIR system.
By Bob
GM Specialist
16/03/2022Q: What is the proper way to remove the inflatable restraint sensing and diagnostic module?
A:
The proper way is to disable the SIR system and remove the floor console, and the SDM.
By Omar
GM Specialist
14/03/2022See more FAQs (5)