Part Description: 2010 Chevrolet Colorado Hose Asm-A/C Evaporator
More Info
Vehicle Fitment
2010 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
FAQ for A/C Hose Repair
Q: What is the recommended torque for the bolt to the receiver dehydrator?
A:
The recommended torque is 28 Nm (21 lb-ft).
By Omar
GM Specialist
18/03/2022
Q: What kind of special tools are needed for the removal of the Air Conditioning Evaporator Tube?
A:
J39400-A Halogen Leak Detector.
By Omar
GM Specialist
17/03/2022
FAQ for Other Repair Info
Q: What is the blower motor installation procedure?
A:
Install the Blower Motor and connect the blower motor electrical connector. Install the blower motor cooling tube and install the blower motor mounting screws. Tighten the screws to 2 Nm and install the right hinge pillar trim panel.
Q: What is the blower motor resistor assembly installation procedure?
A:
First, install the Blower Motor Resistor next install the blower motor resistor mounting screws. Tighten the screws to 1.9 Nm and connect the blower motor resistor electrical connector.
Q: How do you install the Heater Inlet Rear Hose?
A:
You need to install the heater inlet rear hose, reposition the heater inlet rear hose clamp, connect the heater inlet rear hose quick connect fitting, and fill the cooling system.