Part Description: 2010 Chevrolet Cobalt Remanufactured Wiper Motor
More Info
Vehicle Fitment
2010 Chevrolet Cobalt | All Trims | All Engines
$60.52
FAQ for Windshield Wiper Motors Repair
Q: How do I install the wiper motor?
A:
Place the wiper motor in the wiper transmission assembly. Install the wiper motor screws. Install the wiper motor crank arm. Install the windshield wiper transmission and the air inlet grille panel.
By Omar
GM Specialist
17/01/2022
Q: How do I remove the wiper motor?
A:
Remove the air inlet grille panel, the windshield wiper transmission, the wiper crank arm nut, the wiper crank arm from the wiper motor, the wiper motor screws, and the wiper motor from the wiper transmission assembly.
By Bob
GM Specialist
16/01/2022
FAQ for Other Repair Info
Q: How do I install the windshield washer pump?
A:
Place the seal onto the solvent container, then place the Washer Pump into the container, and press in until it is fully seated. Connect the pump electrical connector and the pump hose. Install front fender liner. Lastly, fill the container with solvent.
Q: How do you check the wiper blade element for a flat blade?
A:
You can remove the Wiper Blades, check the length and replace the rubber element, and install the wiper blades.
Q: How do I install the windshield wiper arm?
A:
Start with attaching the wiper arm to the transmission pivot shaft. Then align the wiper blades end dots in the lower windshield blackout. Install the wiper arm and the nut cover. Then operate the wiper arm to test for functionality.