Part Description: 2010 Chevrolet Cobalt Vehicle Speed Sensor
More Info
Vehicle Fitment
2010 Chevrolet Cobalt | All Trims | 4 Cyl 2.2L
$13.76
FAQ for Vehicle Speed Sensors Repair
Q: How do I install the vehicle speed sensor?
A:
Start by greasing the O-ring with transmission fluid. Now you will need to install the VSS assembly and the VSS retainer. Connect the VSS to the VSS connector.
By Bob
GM Specialist
17/01/2022
Q: How do I remove the vehicle speed sensor?
A:
Start with disconnecting the vehicle speed sensor. Then remove the bolt that attaches the retainer, and remove the sensor and the O-ring.
By Omar
GM Specialist
17/01/2022
Q: What is the recommended bolt torque for the vehicle speed sensor retaining bolt?
A:
The recommended bolt torque is 12 Nm (97 LB IN).
By Omar
GM Specialist
11/01/2022
Q: What is the recommended bolt torque for the VSS retainer bolt?
A:
The recommended bolt torque is 12 Nm (8 LB-FT).
By Bob
GM Specialist
11/01/2022
Q: What will need to be removed to access the vehicle speed sensor?
A:
You will need to remove the left front wheel.
By Omar
GM Specialist
07/01/2022
FAQ for Other Repair Info
Q: How many bolts attach to the transmission mount?
Q: How do I install the 1-2 shift solenoid retainer clip?
A:
Start with Installing the 1-2 shift valve spring, the 1-2 shift valve, the 1-2 shift solenoid with O-ring, and the 1-2 shift solenoid retainer clip in that order, then install the transmission side cover. Lastly, reset the TAP values.