< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Cobalt
< Back to View All
Hoods
- Department
- Brands
- Prices
Dorman® OE Solutions Hood Latch for 2010 Chevrolet Cobalt
PartNumber: 820-205Product Specifications- Notes: wo/Keyless Entry; Packaging Type: Box; Pkg Quantity: 1
- Attachment Method: Bolt
- Cable Included: No
- Installation Instructions Included: No
- OE Part Number: 15236097, 15913930
- Thickness: 1.03 In.
- UPC: 885484748972
- Width: 6.2 In.
- Part Description: 2010 Chevrolet Cobalt OE Solutions Hood Latch
Vehicle Fitment- 2010 Chevrolet Cobalt | All Trims | All Engines
$52.65
OEM (Genuine) 2010 Chevrolet Cobalt Latch Assembly
PartNumber: 15913930
Product Specifications- Notes: W/O Keyless Entry
- Other Names: Latch Assembly, Lock
- Item Dimensions: 7.3 x 5.9 x 4.6 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15236097
- Part Description: 2010 Chevrolet Cobalt Latch Assembly
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
$59.11 MSRP:$89.18You Save: $30.07 (34%)OEM (Genuine) 2010 Chevrolet Cobalt Latch Assembly
PartNumber: 22755040
Product Specifications- Notes: W/Keyless Entry
- Other Names: Latch Assembly, Lock
- Item Dimensions: 6.4 x 5.4 x 5.4 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 20882123, 15892845, 19210317
- Part Description: 2010 Chevrolet Cobalt Latch Assembly
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
OEM (Genuine) 2010 Chevrolet Cobalt Latch
PartNumber: 20774886
Product Specifications- Notes: Coupe; Sedan
- Other Names: Latch, Lock
- Item Dimensions: 8.1 x 6.6 x 3.3 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25798557, 15819962, 25862459
- Part Description: 2010 Chevrolet Cobalt Latch
Vehicle Fitment- 2010 Chevrolet Cobalt | Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
FAQ for Hood Latch Repair
Q: How do I install the hood hinge?
A:
Place the hood hinge to the body bolts, then install the front fender, remove the support from the hood, now lower the lower hood and inspect the alignment.
By Bob
GM Specialist
18/01/2022Q: How do I install the hood latch?
A:
Start by attaching the latch release cable to the hood latch, place the latch on the marked location, install the bolts, and then close the hood and press down until the hood is flushed with the fenders.
By Bob
GM Specialist
18/01/2022Q: How do I install the hood side bumper?
A:
Install the bumper to the fender by sliding it forward.
By Omar
GM Specialist
18/01/2022Q: How do I install the rear view seal?
A:
Place the seal on the vehicle and push the rear seal onto the air inlet screen to fully seat the seal.
By Bob
GM Specialist
18/01/2022Q: How do I remove the hood hinge?
A:
After opening the hood, place a support between the hood and air inlet grille panel, mark the position of the hinge and remove the front fender and the hinge bolts along with the hinge.
By Omar
GM Specialist
17/01/2022Q: How do I remove the hood latch?
A:
After raising the hood, mark the location of the latch, then remove the bolts attaching the latch, disconnect the release cable from the latch and now remove the latch from the vehicle.
By Omar
GM Specialist
17/01/2022Q: How do I remove the hood side bumper?
A:
Start with opening the hood and remove the side bumper from the fender by sliding it rearward.
By Omar
GM Specialist
17/01/2022Q: How do I remove the rear hood seal?
A:
Open the hood and pull the rear hood seal from the air inlet screen.
By Bob
GM Specialist
17/01/2022Q: What is the hood rear outer seal removal procedure?
A:
Pull the rear side hood seal and remove the seal from the vehicle. Next, remove any adhesive from the pinch-weld flange and hood hinge.
By Bob
GM Specialist
12/01/2022Q: What is the recommended bolt torque for the Hood Latch Bolts?
A:
The recommended bolt torque is 10 Nm (89 LB IN).
By Omar
GM Specialist
11/01/2022See more FAQs (5)