FAQ for Shift Knob Repair
Q: How do I repair this squeaking noise?
A:
Remove the silver cover, Remove approximately 1 mm (0.040 in) of material off the silver cover where it interferes with the chrome trim ring. Reinstall the silver cover.
By OmarGM Specialist
20/10/2021 Q: How many retaining screws and nuts attach to the shift control assembly?
A:
4retaining screws and nuts attach to the shift control assembly.
By BobGM Specialist
20/10/2021 Q: How many fasteners attach to the lever knob assembly?
A:
4fasteners attach the lever knob assembly.
By BobGM Specialist
20/10/2021 Q: How many control pins will need to be removed?
A:
You will need to remove 2 control pins on each side of the manual control assembly.
By BobGM Specialist
19/10/2021 Q: What is causing this squeaking noise?
A:
This is caused by contact between the silver cover and the chrome trim ring.
By OmarGM Specialist
19/10/2021 Q: What causes the shift knob in a manual transmission to squeak?
A:
The squeaking may be caused by the cover and trim ring making contact with each other.
By BobGM Specialist
19/10/2021 Q: What is the recommended bolt torque for the lever knob assembly fasteners?
A:
The recommended bolt torque is 9 Nm (80 LB IN).
By BobGM Specialist
17/10/2021 Q: What is the recommended bolt torque for the shift control assembly screws and nuts?
A:
The recommended bolt torque is 30 Nm (22 LB-FT).
By OmarGM Specialist
17/10/2021 Q: What is the recommended bolt torque for the transmission control lever knob cover?
A:
The recommended bolt torque is 3 Nm (27 LB IN).
By BobGM Specialist
16/10/2021 Q: What tool is best for removing the knob cover?
A:
Use a flat-bladed plastic trim tool to remove the knob cover.
By BobGM Specialist
15/10/2021 See more FAQs (9)