Part Description: 2010 Chevrolet Aveo Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment
2010 Chevrolet Aveo | All Trims | All Engines
FAQ for Tie Rod End Repair
Q: What is the steering linkage inner tie rod installation procedure?
A:
Attach the steering gear inner tie rod onto the steering gear rack and tighten the steering gear inner tie rod to 128 Nm. Next, install the dust boot from the steering gear and the steering gear from the vehicle.
By Omar
GM Specialist
19/01/2022
Q: What is the steering linkage outer tie rod installation procedure?
A:
First, install the outer tie rod with the lock nuts and tighten the nuts to 54 Nm. Install the outer tie rod with the hex nut.
By Bob
GM Specialist
19/01/2022
FAQ for Other Repair Info
Q: How do you remove the brake drums?
A:
You will need to remove the rear tire/wheel assembly, and the Brake Drum screws, and pull the drum off the hub.
Q: What is the front brake hose installation procedure?
A:
First, install the new Brake Hose to the caliper and tighten the front brake hose-to-caliper bolt to 40 Nm. Next, install the brake hose and the E-ring retainer to the wheel housing bracket. Connect the brake line to the brake hose and tighten the brake line to 16 Nm.
Q: What is the parking brake cable installation procedure?
A:
First, install the new Parking Brake Cable through the brake backing plate and the brake shoes/drums. Next insert the plastic sleeve into the brake backing plate and press in the retaining ring. After that install the parking brake cable to the underbody side brackets on each side of the vehicle and tighten the bolts to 12 Nm. Install the parking cable on the rear axle brackets on each side of the vehicle and tighten the bolt to 12 Nm.