FAQ for Throttle Body Repair
Q: How do I inspect the throttle body from the vehicle?
A:
Start with removing the throttle body from the vehicle. Then open the throttle valve of the throttle body. Next use a solvent-soaked cloth to remove dirt or carbon deposits/buildup from the throttle valve and the throttle bore and make sure that the throttle valve and throttle bore are clean and dry. Check to see if the throttle valve operates smoothly and freely, and install the throttle body.
By BobGM Specialist
25/01/2022 Q: How many bolts attach to the ETC throttle body?
A:
4 Bolts attach to the throttle body.
By BobGM Specialist
22/01/2022 Q: What are the modes of operation for the TAC system?
A:
The modes are minimum pedal value-at key-up, ice break mode, and battery saver mode.
By OmarGM Specialist
21/01/2022 Q: What is the recommended bolt torque for the ETC bolts?
A:
The recommended bolt torque is 8 Nm (70.8 LB IN).
By OmarGM Specialist
20/01/2022 Q: What should be done before servicing the Throttle Body?
A:
You will need to disconnect the negative battery cable and drain the engine coolant.
By OmarGM Specialist
18/01/2022