Part Description: 2010 Chevrolet Aveo Lock Asm, Lift Gate
More Info
Vehicle Fitment
2010 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
FAQ for Door Lock Cylinder Repair
Q: What is the installation procedure for the door lock cylinder?
A:
The procedure is to install the lock cylinder, connect the outside door handle, and install the water deflector.
By Bob
GM Specialist
21/01/2022
Q: What is the proper way to remove the door lock cylinder?
A:
The proper way is to remove the water deflector, disconnect the door handle, and the lock rods, and remove the retaining clip.
By Bob
GM Specialist
20/01/2022
FAQ for Other Repair Info
Q: What is the door jamb switch installation procedure?
A:
First, connect the electrical connector, install the Door Jamb Switch with the screw and tighten to 4.5 Nm.
Q: How do I install the Door Check Link?
A:
Start with removing the door panel. Reposition the door seal trim and remove the bolts on the door and body. Lastly, remove the door and hold the open link.
Q: How do I install the door hinge?
A:
With the help of an assistant install the bolts and hinge to the door and body of the vehicle. Tighten the hinge to body bolts to 35 Nm (26 lb. ft.). then tighten the hinge to door bolts to 15 Nm (11 LB-FT.