2010 Chevrolet Aveo Brake Pad Set

You will need to remove the brake drum, the lower return spring, the upper end of the connecting link, the connecting link spring, the connecting link, the adjusting lever, the upper return spring, the upper adjuster, the trailing shoe spring, the trailing shoe cap, the trailing shoe, leading shoe to hold down, the leading shoe pin, and the leading shoe itself.

Install the piston inner seal into the caliper housing groove and lubricate the outer piston dust seal with brake fluid. Next, install the outer piston dust seal in the groove and lubricate the piston with brake fluid. Install the caliper bleeder valve, and dust cap and tighten to 6 Nm. After that install the front pad brake set and the pad springs. Finally, install the caliper assembly.