Part Description: 2010 Chevrolet Aveo Splash Shield
More Info
Vehicle Fitment
2010 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$4.98MSRP: $9.04
You Save: $4.06 (45%)
FAQ for Brake Dust Shield Repair
Q: How do you remove the rear brake backing plate?
A:
You will need to remove the brake shoes, the nuts that secure the wheel hub to the backing plate, the brake lines, the wheel cylinder assemblies, and the wheel speed sensors.
By Bob
GM Specialist
22/01/2022
Q: What is the torque spec for the brake lines?
A:
16 Nm (12 ft./lbs.).
By Bob
GM Specialist
18/01/2022
Q: What is the torque spec for the wheel hub backing plate bolts?
A:
28 Nm (21 ft./lbs.).
By Omar
GM Specialist
18/01/2022
FAQ for Other Repair Info
Q: What is the parking brake cable installation procedure?
A:
First, install the new Parking Brake Cable through the brake backing plate and the brake shoes/drums. Next insert the plastic sleeve into the brake backing plate and press in the retaining ring. After that install the parking brake cable to the underbody side brackets on each side of the vehicle and tighten the bolts to 12 Nm. Install the parking cable on the rear axle brackets on each side of the vehicle and tighten the bolt to 12 Nm.