Part Description: 2010 Chevrolet Aveo Wheel Rim, Spare
More Info
Vehicle Fitment
2010 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for Alloy Wheels Repair
Q: What is the aluminum wheel finish damage evaluation procedure?
A:
Inspect the wheels for damage and verify the damage is not deeper than what sanding can remove. Next, inspect the wheels for cracks and bent rim flanges.
By Omar
GM Specialist
21/01/2022
Q: What is the wheel stud installation procedure?
A:
Install the wheel stud and the brake drum. Install 3 washers and a wheel nut on the stud. Next, install 2 wheel nuts onto 2 studs.
By Bob
GM Specialist
18/01/2022
FAQ for Other Repair Info
Q: How do you remove the brake drums?
A:
You will need to remove the rear tire/wheel assembly, and the Brake Drum screws, and pull the drum off the hub.
Q: What is the front brake hose installation procedure?
A:
First, install the new Brake Hose to the caliper and tighten the front brake hose-to-caliper bolt to 40 Nm. Next, install the brake hose and the E-ring retainer to the wheel housing bracket. Connect the brake line to the brake hose and tighten the brake line to 16 Nm.
Q: What is the parking brake cable installation procedure?
A:
First, install the new Parking Brake Cable through the brake backing plate and the brake shoes/drums. Next insert the plastic sleeve into the brake backing plate and press in the retaining ring. After that install the parking brake cable to the underbody side brackets on each side of the vehicle and tighten the bolts to 12 Nm. Install the parking cable on the rear axle brackets on each side of the vehicle and tighten the bolt to 12 Nm.