< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Aveo
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Aveo Pulley
PartNumber: 96940406
Product Specifications- Other Names: Pulley
- Item Dimensions: 8.2 x 7.2 x 3.1 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Aveo Pulley
Vehicle Fitment- 2010 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
$138.37 MSRP:$251.61You Save: $113.24 (46%)
OEM (Genuine) 2010 Chevrolet Aveo Clutch Coil
PartNumber: 96405814
Product Specifications- Other Names: Clutch Coil, Coil
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Aveo Clutch Coil
Vehicle Fitment- 2010 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
$79.60 MSRP:$150.19You Save: $70.59 (48%)
OEM (Genuine) 2010 Chevrolet Aveo Clutch Plate & Hub Assembly
PartNumber: 96940405
Product Specifications- Item Dimensions: 8.3 x 7.1 x 4.2 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Aveo Clutch Plate & Hub Assembly
Vehicle Fitment- 2010 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
OEM (Genuine) 2010 Chevrolet Aveo Clutch, A/C
PartNumber: 96408443
Product Specifications- Other Names: Clutch
- Item Dimensions: 8.1 x 7.7 x 3.3 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Aveo Clutch, A/C
Vehicle Fitment- 2010 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
FAQ for A/C Clutch Repair
Q: How can you check if the pulley is fully seated?
A:
You can check if it is fully seated by spinning the pulley.
By Bob
GM Specialist
25/01/2022Q: How can you prevent damage to the rotor hub?
A:
You can prevent damage to the rotor hub by having it properly supported during the bearing removal.
By Omar
GM Specialist
25/01/2022Q: What is the clutch coil removal process on a V5 compressor?
A:
You will need to remove the compressor, the clutch plate and hub assembly, the clutch rotor and bearing, and lastly remove the coil.
By Omar
GM Specialist
21/01/2022Q: What is the installation process for a V5 compressor?
A:
You will need to install the clutch coil assembly, the clutch coil, the clutch rotor and bearing, the clutch plate and hub, and lastly the compressor.
By Bob
GM Specialist
21/01/2022Q: What is the installation process for the clutch coil on an SP10 compressor?
A:
You will need to first install the coil and housing assembly. Then, install the retainer ring and lastly install the clutch and drive assembly.
By Omar
GM Specialist
21/01/2022Q: What is the installation process for the clutch plate/hub on a V5 compressor?
A:
You will need to install the clutch hub key, align the clutch hub key, install the clutch hub, install the shaft nut, and lastly install the compressor.
By Bob
GM Specialist
21/01/2022Q: What is the removal process for the clutch coil on an SP10 compressor?
A:
You will need to remove the clutch and drive assembly, the pulley and bearing assembly, the coil retainer, and lastly the coil and housing assembly.
By Omar
GM Specialist
19/01/2022Q: What are the removal process for the clutch plate and hub assembly on an SP10 compressor?
A:
You will need to remove the compressor and pull the clutch drive assembly up by hand.
By Bob
GM Specialist
19/01/2022Q: What is the specified air gap for the clutch drive assembly on an SP10 compressor?
A:
0.3-0.7 mm (0.012-0.028 in).
By Bob
GM Specialist
19/01/2022Q: What is the specified air gap size on an SP10 compressor?
A:
0.3-0.7 mm (0.012-0.028in).
By Omar
GM Specialist
19/01/2022See more FAQs (10)