< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Avalanche
< Back to View All
Air Filters & Intake Systems
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Avalanche Manifold
PartNumber: 12638038
Product Specifications- Notes: Avalanche; 5.3l
- Other Names: Intake Manifold, Manifold
- Item Dimensions: 29.4 x 18.4 x 12.2 inches
- Item Weight: 17.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Avalanche Manifold
Vehicle Fitment- 2010 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX
$196.47 MSRP:$325.19You Save: $128.72 (40%)
FAQ for Intake Manifold Repair
Q: Can the intake manifold gaskets be reused?
A:
No, it is recommended the gaskets be replaced with new ones.
By Bob
GM Specialist
01/11/2022Q: What should be done before disconnecting any electrical connectors?
A:
You will need to remove the air cleaner outlet duct, the generator, and the engine harness retainer from the stud and locator.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the oil pressure sensor?
A:
The recommended bolt torque is 35 Nm (26 LB-FT).
By Bob
GM Specialist
01/11/2022Q: Can the oil pressure sensor washer be reused?
A:
No, it is recommended the washer be replaced whenever the part is serviced.
By Bob
GM Specialist
01/11/2022Q: How many bolts attach to the fuel rail?
A:
4 Bolts attach to the fuel rail.
By Bob
GM Specialist
01/11/2022Q: How do I remove the Upper Intake Manifold Cover?
A:
Start with removing the intake manifold. Next, reposition the brake booster vacuum hose clamp at the intake manifold. Remove the brake booster vacuum hose from the intake manifold nipple, the upper intake manifold cover nut, and the cover.
By Bob
GM Specialist
01/11/2022Q: How many nuts and bolts attach to the throttle body gasket?
A:
2nuts and 2 bolts attach the throttle body gasket.
By Bob
GM Specialist
01/11/2022Q: How do I remove the Upper Intake Manifold Sight Shield?
A:
First, grasp the front of the intake manifold sight shield and disengage the grommets from the studs. Next, remove the intake manifold sight shield from the retainer slots and the intake manifold sight shield retainer bolts and retainer.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the fuel rail bolts?
A:
The recommended bolt torque is 10 Nm (89 LB IN).
By Bob
GM Specialist
01/11/2022Q: What will need to be removed to access the Engine Block Valley Cover?
A:
You will need to remove the intake manifold.
By Bob
GM Specialist
01/11/2022See more FAQs (8)