< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Avalanche
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 Chevrolet Avalanche AC Belt
PartNumber: 12626222
Product Specifications- Other Names: Drive Belt, Serpentine Belt
- Item Dimensions: 6.2 x 3.4 x 0.9 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12590622
- Part Description: 2010 Chevrolet Avalanche AC Belt
Vehicle Fitment- 2010 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$36.63 MSRP:$66.32You Save: $29.69 (45%)
OEM (Genuine) 2010 Chevrolet Avalanche AC Belt
PartNumber: 19210691
Product Specifications- Other Names: AC Belt
- Item Dimensions: 16.8 x 9.8 x 3.6 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19178068, 12603509
- Part Description: 2010 Chevrolet Avalanche AC Belt
Vehicle Fitment- 2010 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$46.02 MSRP:$81.30You Save: $35.28 (44%)
FAQ for Drive Belt Repair
Q: What is the installation procedure for the drive belt?
A:
The procedure is to install the breaker bar, the drive belt, and the air cleaner.
By Bob
GM Specialist
29/10/2022Q: What should I avoid using on the drive belt?
A:
Avoid using belt dressing on the drive belt. Belt dressing causes the breakdown of the composition of the drive belt.
By Bob
GM Specialist
29/10/2022Q: How do I install the Air Conditioning Compressor Belt?
A:
First, you will need to position the belt behind the rear face of the balancer and off of the A/C pulley. Next, install the installation tool onto the balancer, Slide the installation tool up, install the belt onto the installation tool, then slide the installation tool down, position the belt onto the A/C pulley, and apply light tension to the belt. Rotate the pulley in a clockwise direction while using finger pressure to pull the belt forward. Check that the ribbed area of the belt stays facing forward and the belt aligns properly with the A/C pulley. Fully rotate the balancer to check the proper installation. Install skid plate and accessory drive belt.
By Bob
GM Specialist
29/10/2022Q: How do I remove the Air Conditioning Compressor Belt?
A:
Start with removing the accessory drive belt and the skid plate, and cutting the belt from the A/C and crankshaft pulleys.
By Bob
GM Specialist
29/10/2022Q: How do you remove the drive belt?
A:
You can remove the air cleaner outlet duct, the drive belt, and the breaker bar.
By Bob
GM Specialist
29/10/2022