FAQ for Door Seal Repair
Q: What is the rear side door window weatherstrip service procedure?
A:
Use a plastic flat-bladed tool to assist in releasing the window weatherstrip from the door frame. Next, carefully pull the window weatherstrip from the door flange.
By BobGM Specialist
01/11/2022 Q: What is the front door opening weatherstrip removal procedure?
A:
Remove the front door sill plate and the weatherstrip from the pinch-weld flange.
By BobGM Specialist
01/11/2022 Q: What is the rear door opening weatherstrip installation procedure?
A:
First, align the weatherstrip to the door opening with the 2 dots positioned on the upper right and the left side. Next, align the door opening with the bond joint positioned at the lower center and install the weatherstrip to the pinch-weld flange.
By BobGM Specialist
01/11/2022 Q: What is the front-side door window weatherstrip service procedure?
A:
Place the door window as needed for service and remove the front door trim panel. Next, remove the water deflector and the front door inner sealing strip. Tighten the front door window weatherstrip lower bolt to 11 Nm.
By BobGM Specialist
01/11/2022 Q: What is the front door opening weatherstrip installation procedure?
A:
Align the weatherstrip to the door opening with the bond joint positioned at the lower center of the door opening. Next, install the weatherstrip to the pinch-weld flange and make sure the weatherstrip is fully seated. Finally, install the front door sill plate.
By BobGM Specialist
01/11/2022 Q: What is the rear side door front auxiliary weatherstrip service procedure?
A:
Remove the push-in retainer at the top and pull the sealing strip from the door.
By BobGM Specialist
01/11/2022 See more FAQs (1)