FAQ for Brake Master Cylinder Repair
Q: How many nuts attach to the brake pedal bracket?
A:
4nuts attach the brake pedal bracket.
By BobGM Specialist
01/11/2022 Q: What will need to be disconnected from the master cylinder?
A:
You will need to disconnect the BPMV supply hose quick connect and the BPMV return hose quick connect.
By BobGM Specialist
01/11/2022 Q: What is the recommended brake fluid type?
A:
Use only Delco Supreme 11 or DOT-3 brake fluid from a clean, sealed brake fluid container.
By BobGM Specialist
01/11/2022 Q: How many pins are in the brake master cylinder reservoir?
A:
There are 2 pins in the brake master cylinder.
By BobGM Specialist
01/11/2022 Q: How many fittings are in the brake pipe?
A:
2fittings attach to the brake pipe.
By BobGM Specialist
01/11/2022 Q: What is the recommended bolt torque for the brake pushrod retainer nut?
A:
The recommended bolt torque Is 10 Nm (89 lb. in).
By BobGM Specialist
01/11/2022 Q: How many retainers attach to the ABS module splash shield?
A:
2retainers attach the splash shield.
By BobGM Specialist
01/11/2022 Q: Will the vehicle need to be lifted?
A:
Yes, you will need to lift and support the vehicle.
By BobGM Specialist
01/11/2022 Q: How many seals are in the master cylinder reservoir?
A:
2seals are in the master cylinder reservoir.
By BobGM Specialist
01/11/2022 Q: What should be done before filling the brake master cylinder reservoir?
A:
Visually inspect the brake fluid level through the brake master cylinder reservoir. If the brake fluid level is at or below the half-full point during routine fluid checks, the brake system should be inspected for wear and possible brake fluid leaks.
By BobGM Specialist
01/11/2022 See more FAQs (19)