FAQ for Brake Caliper Repair
Q: What will need to be removed to access the front brake caliper?
A:
You will need to remove the wheel and tire assembly.
By BobGM Specialist
29/10/2022 Q: What is the recommended bolt torque for the brake caliper bolts?
A:
The recommended bolt torque is 100 Nm (74 lb ft.).
By BobGM Specialist
29/10/2022 Q: How do I install the c-clamps onto the caliper?
A:
Install 2 large C-clamps over the top of the caliper housing and against the back of the outboard brake pad. Slowly tighten the C-clamps until the caliper pistons are pushed completely into the caliper bores.
By BobGM Specialist
29/10/2022 Q: What should be done before servicing the Front Brake Caliper?
A:
You will need to inspect the fluid level in the brake master cylinder reservoir, raise and support the vehicle, and remove the tire and wheel assembly.
By BobGM Specialist
29/10/2022 Q: What is the recommended bolt torque for the rear brake caliper bolts?
A:
The recommended bolt torque is 40 Nm (30 lb. ft.).
By BobGM Specialist
29/10/2022 Q: How do I install the c-clamps onto the rear caliper?
A:
Install 2 large C-clamps over the top of the caliper housing and against the back of the outboard brake pad. Slowly tighten the C-clamps until the caliper pistons are pushed completely into the caliper bores.
By BobGM Specialist
29/10/2022 Q: What needs to be done before servicing the Rear Brake Caliper Bracket?
A:
You will need to inspect the fluid level in the brake master cylinder reservoir, raise and support the vehicle, and remove the tire and wheel assembly.
By BobGM Specialist
29/10/2022 Q: What needs to be done before servicing the Rear Brake Caliper?
A:
You will need to inspect the fluid level in the brake master cylinder reservoir, raise and support the vehicle, and remove the tire and wheel assembly.
By BobGM Specialist
29/10/2022 Q: How many bolts attaching the brake caliper are there?
A:
2 Bolts attaching each brake caliper.
By BobGM Specialist
29/10/2022 Q: Can the copper gaskets be reused?
A:
No, it is recommended the copper gaskets be replaced with new ones.
By BobGM Specialist
29/10/2022 See more FAQs (7)