< Back ×
My Vehicle Change Vehicle
2010 Chevrolet Avalanche
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2010 Chevrolet Avalanche Passenger Discriminating Sensor
PartNumber: 13502744
Product Specifications- Item Dimensions: 3.2 x 2.2 x 2.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Chevrolet Avalanche Passenger Discriminating Sensor
Vehicle Fitment- 2010 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX
$184.12 MSRP:$277.77You Save: $93.65 (34%)
Dorman® OE Solutions Air Bag Impact Sensor for 2010 Chevrolet Avalanche
PartNumber: 590-225Product Specifications- Connector Gender: Female
- Connector/Terminal Configuration: 2 Pin
- OE Part Number: 13502744
- Package Quantity: 1
- UPC: 019495423812
- Part Description: 2010 Chevrolet Avalanche OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2010 Chevrolet Avalanche | All Trims | All Engines
$118.05
OEM (Genuine) 2010 Chevrolet Avalanche Side Sensor
PartNumber: 20884470
Product Specifications- Notes: Rear; Front
- Location: Driver Side; Passenger Side
- Other Names: Front Sensor, Side Impact Sensor, Side Sensor
- Item Dimensions: 3.3 x 2.1 x 2.1 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25984547
- Part Description: 2010 Chevrolet Avalanche Side Sensor
Vehicle Fitment- 2010 Chevrolet Avalanche | Black Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$194.74 MSRP:$293.79You Save: $99.05 (34%)
FAQ for Air Bag Sensor Repair
Q: How many bolts does the side impact sensor module have?
A:
The side impact sensor module has a total of 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Inflatable Restraint Front End Sensor?
A:
You will need to disable the SIR System, then lift and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be done before servicing the Inflatable Restraint Side Impact Sensor?
A:
You will need to disable the SIR system, and remove the rear side door trim panel and the rear side door water deflector.
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the SIR front-end discrimination sensor bolt?
A:
The recommended bolt torque is 8 Nm (721 LB IN).
By Bob
GM Specialist
01/11/2022Q: What is the recommended bolt torque for the Inflatable restraint side impact sensor module?
A:
The recommended bolt torque is 9 Nm (80 LB IN).
By Bob
GM Specialist
01/11/2022Q: How many bolts attach to the Inflatable restraint side impact sensor module?
A:
2 Bolts attach the sensor.
By Bob
GM Specialist
01/11/2022Q: How should I remove the SIR front-end discrimination sensor bolt?
A:
Loosen the bolts and slide the sensors out of the keyhole slots. Do not remove the bolts separately as they are integral to the sensor assembly.
By Bob
GM Specialist
01/11/2022Q: What should you do when working on the electrical diagnosis?
A:
You should remove the airbag fuse from the vehicle.
By Bob
GM Specialist
28/10/2022Q: How many nuts hold the inflatable restraint sensing and diagnostic module?
A:
3nuts.
By Bob
GM Specialist
28/10/2022Q: What can you do if you have been involved in an accident and the airbags are deployed?
A:
You can disconnect the negative battery cable from the vehicle.
By Bob
GM Specialist
28/10/2022See more FAQs (6)