2010 Cadillac SRX Windshield Wiper Arms

You should carefully release the finish cover locking tabs securing the cover to the wiper arm, gently rock the wiper arm to remove the wiper arm from the wiper motor pivot shaft, remove the rear window wiper blade assembly from the rear wiper arm and cycle the rear wiper motor completely back to the park position before installing the rear wiper arm. Then, you should align the rear wiper arm blade tip to the 2 mm black dot in the lower passenger side of the rear window, wet cycle the rear wiper arm and re-check the blade tip alignment to the 2 mm black dot.

You should open and support the hood to access and remove the wiper blade assembly, pry the cap from the wiper arm nut, rock the wiper arm side to side, and remove and clean the transmission pivot shaft with a soft wire brush before installing the wiper arm back onto the pivot shaft. Then, you should remove the wiper blade assembly from the wiper arm and hold the driver-side wiper arm blade tip to the center dot located in the windshield blackout below the dot matrix while securing the nut and hold the passenger-side wiper arm blade tip to the passenger side outer dot located in the windshield blackout below the dot matrix while securing the nut.