< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Bearing Asm-Front Wheel
PartNumber: 13589508
Product Specifications- Notes: W/O AWD; W/AWD; Srx
- Location: Driver Side; Passenger Side
- Other Names: Front Hub & Bearing, Hub, Hub & Bearing
- Item Dimensions: 6.9 x 7.0 x 6.6 inches
- Item Weight: 9.40 Pounds
- Replaces: 13502789, 13504971, 13580489
- Part Description: 2010 Cadillac SRX Bearing Asm-Front Wheel
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Wheel Bearing Repair
Q: How many bolts attach to the wheel bearing and hub?
A:
3 Bolts attach the wheel bearing and hub.
By Bob
GM Specialist
01/11/2022Q: How to measure the voltage?
A:
You should disconnect the electrical harness connector for the circuit being tested and enable the circuit and/or system being tested. You should turn in the ignition, with the engine off, turn on the engine, the circuit, and/or system with a scan tool in output controls and the switch for the circuit and/or system being tested. Then, you should select the V (AC) or V (DC) position on the DMM, and connect the positive lead of the DMM to the point of the circuit to be tested and the negative lead of the DMM to a good ground.
By Bob
GM Specialist
01/11/2022Q: How to replace the rear wheel bearing and hub?
A:
You should raise and support the vehicle, remove the tire and wheel assembly, separate the wheel drive shaft from the knuckle if needed and remove the rear brake rotor and the rear wheel speed sensor.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the wheel bearing and hub bolt?
A:
The recommended torque is 110 Nm (81 lb-ft).
By Bob
GM Specialist
01/11/2022