FAQ for Turbocharger Oil Line Repair
Q: What is the recommended torque for the turbocharger oil return pipe fastener?
A:
The recommended torque is 14 Nm (11 lb-ft).
By BobGM Specialist
02/11/2022 Q: How to replace the turbocharger oil feed pipe?
A:
First, you should remove the battery positive cable on the B+ stud at the back of the generator and remove the left exhaust manifold heat shield. Then, you should raise and support the vehicle and remove the engine oil cooler outlet hose if necessary.
By BobGM Specialist
02/11/2022 Q: How to replace the turbocharger oil return pipe?
A:
You should remove the charge air cooler Inlet duct, the exhaust manifold heat shield, the radiator outlet pipe, the turbocharger oil feed pipe, and the turbocharger coolant feed pipe. Finally, you should transfer parts as necessary.
By BobGM Specialist
02/11/2022 Q: How many fasteners attach to the turbocharger oil return pipe?
A:
2fasteners attach the turbocharger oil return pipe.
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the turbocharger oil feed pipe bracket bolt?
A:
The recommended torque is 10 Nm (89 lb in).
By BobGM Specialist
02/11/2022 Q: What is the recommended torque for the banjo bolt?
A:
The recommended torque is 35 Nm (26 lb-ft).
By BobGM Specialist
02/11/2022 Q: How to replace the turbocharger coolant feed pipe (LAU)?
A:
You should drain the cooling system, relocate the auxiliary water pump and remove the secondary air injection pump and the starter.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the banjo bolt?
A:
The recommended torque is 35 Nm (26 lb-ft).
By BobGM Specialist
01/11/2022 Q: How to replace the turbocharger coolant return pipe (LAU)?
A:
You should drain the cooling system and remove the radiator surge tank engine hose.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the turbocharger coolant feed bracket bolt?
A:
The recommended torque is 10 Nm (7 lb-ft).
By BobGM Specialist
01/11/2022 See more FAQs (5)