< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac SRX Throttle Body
PartNumber: 12616994
Product Specifications- Other Names: Throttle Body
- Item Dimensions: 8.2 x 6.9 x 5.7 inches
- Item Weight: 2.10 Pounds
- Replaced by: 12694878
- Part Description: 2010 Cadillac SRX Throttle Body
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
$206.35 MSRP:$389.36You Save: $183.01 (48%)
Spectra Premium® Fuel Injection Throttle Body for 2010 Cadillac SRX
PartNumber: TB1044Product Specifications- UPC: 627785018343
- Part Description: 2010 Cadillac SRX Fuel Injection Throttle Body
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 3.0L
$120.75
Cardone Reman® Remanufactured Throttle Body for 2010 Cadillac SRX
PartNumber: 67-3019Product Specifications- Notes: Relearn procedure may need to be performed upon installation of unit. Please refer to the service manual for vehicle specific instructions.
- E-Waste: Yes
- Gaskets Included: No
- Housing Color/Finish: Gray/Unfinished
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Product Condition: Remanufactured
- Throttle Body Actuation Type: Electric
- Throttle Body Inlet Shape: Round
- Throttle Body Outlet Shape: Round
- Throttle Position Sensor Included: Yes
- Part Description: 2010 Cadillac SRX Remanufactured Throttle Body
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 3.0L
$94.17OEM (Genuine) 2010 Cadillac SRX Throttle Body
PartNumber: 12694878
Product Specifications- Notes: Srx; 3.0l
- Other Names: Throttle Body
- Item Dimensions: 7.1 x 6.4 x 5.7 inches
- Item Weight: 2.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12604075, 12616994, 12609009
- Part Description: 2010 Cadillac SRX Throttle Body
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
$206.35 MSRP:$389.36You Save: $183.01 (48%)
Dorman® Throttle Body Assemblies for 2010 Cadillac SRX
PartNumber: 977-314Product Specifications- Adjustable: No
- Bore Diameter: 2.835''
- Connector/Terminal Type: Blade
- Electrical Connection Type: Female/Blade
- Fuel Injectors Included: No
- Fuel System Type: Gas
- Gasket or Seal Included: No
- Housing Material: Aluminum
- Idle Air Control Motor Included: No
- Inlet Diameter: 2.83''
- Inlet Quantity: 1
- Inlet Type: Non-Flanged
- Installation Hardware Included: No
- Outlet Diameter: 2.83''
- Outlet Quantity: 1
- Outlet Type: Flanged
- UPC: 019495280286
- Part Description: 2010 Cadillac SRX Throttle Body Assemblies
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 3.0L
$146.34
FAQ for Throttle Body Repair
Q: How to replace the throttle body assembly (LAU)?
A:
You should remove the charge air cooler outlet duct and support bracket, disconnect the electrical connector, install a new throttle body seal and perform the throttle learn procedure.
By Bob
GM Specialist
02/11/2022Q: How to inspect and clean the throttle body?
A:
You should remove the air cleaner outlet duct and inspect the throttle body bore and the throttle valve plate for deposits. You will need to open the throttle valve to inspect all surfaces. Then, you should clean the throttle body bore and the throttle valve plate using a clean shop towel with GM top engine cleaner, install the air cleaner outlet duct, and perform the throttle/idle learn procedure.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the throttle body fastener?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
02/11/2022Q: How many fasteners attach to the throttle body?
A:
There are 4 fasteners that attach to the throttle body.
By Bob
GM Specialist
02/11/2022