< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Steering Systems
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Steering Sensor Assembly
PartNumber: 25849366
Product Specifications- Other Names: Angle Sensor, Steering Sensor Assembly
- Item Dimensions: 4.1 x 3.1 x 1.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Steering Sensor Assembly
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
$47.77 MSRP:$90.14You Save: $42.37 (48%)
FAQ for Steering Wheel Speed Sensor Repair
Q: What special tools do we need when we replace the FCI connectors (lever lock)?
A:
The special tool we need is a J-38125 terminal repair kit.
By Bob
GM Specialist
01/11/2022Q: How to remove the FCI connectors (lever lock)?
A:
You should slide the lever lock forward while pressing down on the lever lock release tab, view the connector in the released position, disconnect the connector from the component, locate the dress cover locking tabs at the corners of the dress cover and use a small flat-blade tool to release the locking tabs and remove the dress cover and to slide the terminal position assurance (TPA) up one notch on both ends of the connector. Finally, while holding the removal tool in place, you should gently pull the wire out of the back of the connector. Always remember never to use force when pulling a terminal out of a connector.
By Bob
GM Specialist
01/11/2022Q: How to replace the steering wheel pad accessory wiring harness?
A:
You should remove the steering wheel inflatable restraint module, the steering wheel horn contact, the cruise control switch, and the radio control switch, note the harness routing, follow the same routing and disconnect the electrical connectors.
By Bob
GM Specialist
01/11/2022