< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2010 Cadillac SRX Pad Asm-Rear Seat Cushion
PartNumber: 25982337
Product Specifications- Notes: Seat Cushion-40% Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 22.6 x 21.8 x 7.2 inches
- Item Weight: 4.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Pad Asm-Rear Seat Cushion
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$77.11 MSRP:$170.47You Save: $93.36 (55%)
OEM (Genuine) 2010 Cadillac SRX Seat Cushion Pad
PartNumber: 25959566
Product Specifications- Notes: Seat Cushion, W/O Memory Package
- Other Names: Seat Cushion Pad
- Item Dimensions: 23.8 x 21.1 x 6.7 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Seat Cushion Pad
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$45.11 MSRP:$68.06You Save: $22.95 (34%)
OEM (Genuine) 2010 Cadillac SRX Seat Cushion Pad
PartNumber: 22866941
Product Specifications- Notes: Seat Cushion, W/Memory Package, W/Fan
- Other Names: Seat Cushion Pad
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25898786, 20987308
- Part Description: 2010 Cadillac SRX Seat Cushion Pad
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
OEM (Genuine) 2010 Cadillac SRX Pad Asm-Driver Seat Cushion
PartNumber: 20987309Product Specifications- Notes: Seat Cushion, W/Memory Package, W/O Fan
- Other Names: Seat Cushion Pad
- Item Dimensions: 23.1 x 21.3 x 6.5 inches
- Item Weight: 2.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25959400
- Part Description: 2010 Cadillac SRX Pad Asm-Driver Seat Cushion
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
OEM (Genuine) 2010 Cadillac SRX Pad Asm-Rear Seat Cushion
PartNumber: 25981155
Product Specifications- Notes: Seat Cushion-60% Side
- Other Names: Seat Cushion Pad
- Item Dimensions: 34.4 x 26.3 x 9.4 inches
- Item Weight: 3.00 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Pad Asm-Rear Seat Cushion
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
FAQ for Seat Cushion Pad Repair
Q: What do we need to note when we replace the driver or passenger seat back cushion cover and pad?
A:
You should not repair or replace the seat stitching or seams in the seat back trim cover with an internally mounted seat side airbag module and you should replace the complete seat back trim cover from the OEM.
By Bob
GM Specialist
01/11/2022Q: How many rivets attach to the front seat back cushion pad wire?
A:
4rivets attach the front seat back cushion pad wire.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the driver or passenger seat back cushion frame bolt?
A:
The recommended torque is 35 Nm (26 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear seat cushion frame fastener?
A:
The recommended torque is 21 Nm (15 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to replace the rear seat cushion cover and pad (40 percent seat)?
A:
You should remove the rear recliner outer finish cover, the rear seat track rear outboard cover, the rear seat armrest hinge finish cover, and the rear seat recliner inner finish cover, disengage the j-channel retainers from the seat cushion frame, disconnect the electrical connectors that attach to the seat cushion and the hog rings that secure the rear seat cushion cover to the pad, remove the seat cushion cover and pad from the seat cushion frame as an assembly and pull the cover away from the pad to disengage the retainers.
By Bob
GM Specialist
01/11/2022Q: How to replace the driver or passenger seat back cushion finish panel (without UWG)?
A:
You should detach the seat back cushion cover bottom two Bungie clips from the crossbar, pull the seat back cushion cover bottom back to gain access to the panel screws that attach the panel to the lumbar support bracket, pull the panel downward first to disengage the upper retainers and move the finish panel and side clips to one side to disengage the panel from the seat frame.
By Bob
GM Specialist
01/11/2022Q: How to remove the front seat cushion cover and pad?
A:
You should remove the front seat, the front seat adjuster, the front seat outer adjuster finish cover, the front seat inner recliner finish cover, and the rear retainers on the seat cushion cover from the seat frame. Then, you should disengage the J-channel retainers from the seat frame, disconnect the electrical connector and the duct from the vent fan, remove the seat cushion cover and pad from the seat cushion frame as an assembly, and the hog rings from the underside of the seat cover and pull the cushion cover off of the pad.
By Bob
GM Specialist
01/11/2022Q: How to replace the driver or passenger seat back cushion frame?
A:
You should remove the driver or passenger seat, the driver or passenger seat outer adjuster finish cover and the driver or passenger seat inner recliner finish cover. Then, you should disconnect electrical connectors as needed and if replacing them with a new front seat back cushion frame, you should transfer components as necessary.
By Bob
GM Specialist
01/11/2022Q: How to replace the rear seat cushion frame (40 percent seat)?
A:
You should remove the rear seat and the rear seat cushion cover and pad, disengage the hog rings and j-channel retainers from the seat back cushion frame, pull the cover away from the pad to gain access to the recliner fasteners, disconnect the electrical connector, transfer components as necessary and note the routing of the electrical harness for installation.
By Bob
GM Specialist
01/11/2022Q: How to replace the driver or passenger seat back cushion pad wire?
A:
You should remove the video display and the driver or passenger seat back cushion finish cover, use the proper eye protection when drilling to prevent metal chips from causing physical injury, unhook the seat back cushion cover J-hook from pad wire, drill out all of the guide rivets before removing the pad wire and re-rivet at the same location on the cushion frame with new rivets when you re-install the cushion pad wire.
By Bob
GM Specialist
01/11/2022See more FAQs (9)