2010 Cadillac SRX Ride Height Sensor

First, you should raise and support the vehicle. Then, you should remove the front lower control arm rear bolts and remove and discard the front lower Control Arm Bushing bolt. Before removing the lower control arm bushing, you should note the location of the marking on the bushing. Finally, you should position the control arm away from the underside of the vehicle to remove the bushing from the lower control arm.

You should raise and support the vehicle and remove the tires and wheels, the stabilizer links from the stabilizer shaft, the rear bolts of the front drivetrain, and the front suspension frame and lower to gain access to the stabilizer shaft insulators. Then, you should install the stabilizer bar insulator so that the chamfered edge is facing toward the outside of the vehicle.