< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac SRX Power Steering Pump
PartNumber: 13505837
Product Specifications- Notes: 3.0 Liter; Srx; 3.0l
- Other Names: Power Steering Pump
- Item Dimensions: 6.8 x 6.5 x 6.3 inches
- Item Weight: 2.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15938622
- Part Description: 2010 Cadillac SRX Power Steering Pump
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$193.77 MSRP:$365.66You Save: $171.89 (48%)
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2010 Cadillac SRX
PartNumber: 21-4075Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Aluminum
- Import or Domestic: Import
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Hose Barb
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2010 Cadillac SRX Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 3.0L
$60.02
MAVAL® Remanufactured Power Steering Pump for 2010 Cadillac SRX
PartNumber: 97221MProduct Specifications- Notes: Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 843613121751
- Part Description: 2010 Cadillac SRX Remanufactured Power Steering Pump
Vehicle Fitment- 2010 Cadillac SRX | All Trims | 6 Cyl 3.0L
OEM (Genuine) 2010 Cadillac SRX Pump Asm-P/S
PartNumber: 13574902
Product Specifications- Notes: 2.8 Liter
- Other Names: Power Steering Pump
- Item Dimensions: 6.3 x 12.6 x 10.6 inches
- Item Weight: 5.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 13501428, 13505836
- Part Description: 2010 Cadillac SRX Pump Asm-P/S
Vehicle Fitment- 2010 Cadillac SRX | Performance, Premium | 6 Cyl 2.8 L GAS
FAQ for Power Steering Pump Repair
Q: How to replace the power steering pump pulley?
A:
You should remove the power steering pump, remove the power steering pump pulley, and the J-25033-C installer to install the power steering pump pulley. Finally, you should ensure the axial tolerance(a)of the power steering pump pulley on the power steering pump shaft is within 0.25 mm(0.010in).
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the power steering pump?
A:
You should place drain pans under the vehicle, remove as much power steering fluid from the power steering fluid reservoir as possible, the drive belt from the power steering pump pulley only, and the right front tire and wheel assembly. Then, you should disconnect the power steering fluid reservoir outlet hose from the power steering pump and the power steering gear inlet hose from the power steering pump.
By Bob
GM Specialist
01/11/2022Q: What special tools do we need when we replace the power steering pump pulley?
A:
The special tools we need are the J-25033-C-pulley installer and the J-25034-C-pulley remover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump bolt?
A:
The recommended torque is 22 Nm (16 lb-ft).
By Bob
GM Specialist
01/11/2022