2010 Cadillac SRX Interior Light Bulb

You should open and support the hood, remove the front bumper fascia and the front compartment side sight shields and disconnect the headlamp electrical connector at the base of the headlamp assembly.

You should remove the front wheelhouse liner, reach inside the fender well, rotate the bulb socket a quarter turn and remove, pull the turn signal lamp bulb from the lamp socket and ensure the fingers on the turn signal lamp socket point forward upon installation. If the socket fingers point rearward, the bulb socket will not seal in the lamp housing.

You should remove the rear tail lamp assembly and rotate the backup lamp bulb socket counterclockwise from the tail lamp assembly.