< Back ×
My Vehicle Change Vehicle
2010 Cadillac SRX
< Back to View All
Air Bag
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac SRX Side Sensor
PartNumber: 13502577
Product Specifications- Notes: Sensors & Modules; Sensors & Modules, Front Door;Sensors & Modules, Rear Door; Srx;Srx; Front;Srx; Rear
- Location: Driver Side; Passenger Side
- Item Dimensions: 2.6 x 1.6 x 1.3 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Side Sensor
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
$191.16 MSRP:$288.39You Save: $97.23 (34%)
OEM (Genuine) 2010 Cadillac SRX Sensor
PartNumber: 25928986
Product Specifications- Notes: Sensors & Modules, Seat Belt Alarm
- Location: Passenger Side
- Other Names: Sensor
- Item Dimensions: 10.0 x 9.7 x 4.5 inches
- Item Weight: 2.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac SRX Sensor
Vehicle Fitment- 2010 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX
$70.47 MSRP:$110.84You Save: $40.37 (37%)
Dorman® OE Solutions Air Bag Impact Sensor for 2010 Cadillac SRX
PartNumber: 590-227Product Specifications- Notes: Door Mounted
- Connector Gender: Female
- Package Contents: 1 Sensor
- Terminal Quantity: 2
- UPC: 037495274432
- Part Description: 2010 Cadillac SRX OE Solutions Air Bag Impact Sensor
Vehicle Fitment- 2010 Cadillac SRX | All Trims | All Engines
FAQ for Air Bag Sensor Repair
Q: What do we need to note when we replace the steering wheel inflatable restraint module?
A:
If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period.
By Bob
GM Specialist
01/11/2022Q: How many fasteners attach to the roof side rail inflatable restraint module?
A:
There are 9 fasteners that attach the roof side rail inflatable restraint module.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the instrument panel inflatable restraint module nut?
A:
The recommended torque is 9 Nm (79 lb in).
By Bob
GM Specialist
01/11/2022Q: What special tools do we need when we handle the inflatable restraint module?
A:
The special tools are EL-38826-SIR Deployment Harness and EL-39401-B-SIR Deployment Fixture.
By Bob
GM Specialist
01/11/2022Q: What parts need to be inspected after the deployment of a side-impact airbag?
A:
The seat cushion frame. the seat recliner, if equipped. the seat adjuster. the seat back frame.
By Bob
GM Specialist
01/11/2022Q: What do we need to note when we handle or store an un-deployed airbag?
A:
You should take special care since an airbag deployment produces a rapid generation of gas. This may cause the airbag, or an object in front of the airbag, to project through the air in the event of an unlikely deployment.
By Bob
GM Specialist
01/11/2022Q: What do we need to note when we install the roof rail airbag?
A:
You should not twist or turn the airbag 360 degrees. The wrong actions could cause the airbag not to deploy correctly and personal injury.
By Bob
GM Specialist
01/11/2022Q: What should we do first when we replace the steering wheel inflatable restraint module?
A:
You need to disable the SIR system.
By Bob
GM Specialist
01/11/2022Q: What's the main procedure to replace the steering wheel inflatable restraint module?
A:
You should first release the connector position assurance (CPA) retainer and then disconnect the electrical connectors. Finally, you fully deploy the module before disposal.
By Bob
GM Specialist
01/11/2022Q: How to replace the instrument panel inflatable restraint module?
A:
You should disable the SIR system, remove the instrument panel assembly and the air distribution duct and fully deploy the module before disposal. If the module was replaced under warranty, you should fully deploy and dispose of the module, after the required retention period.
By Bob
GM Specialist
01/11/2022See more FAQs (20)