2010 Cadillac SRX Air Bag Clockspring

First, you should verify the following conditions before centering the supplemental inflatable restraint (SIR) steering wheel module coil. Then, you should turn the lobe of the clock spring clockwise until the coil ribbon stops. After that, you should turn the lobe of the clock spring counterclockwise approximately 3 turns to the Neutral position. Finally, you should properly align until the centering window turns yellow which indicates the center position.

The recommended torque is 3 Nm (27 lb in).

There are 4 bolts attached to the inflatable restraint steering wheel module coil.

You should first remove the steering wheel and the steering column shroud. Then, you should disconnect any electrical connectors as necessary. After that, you should transfer the steering angle sensor. Finally, you should ensure the coil is centered during installation. If you are installing a new coil, you should remove the centering tab after the coil is on the steering column.