< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Wipers & Washers
- Department
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Wiper Arm
PartNumber: 22917502
Product Specifications- Notes: 2nd Design
- Location: Driver Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 4.2 x 27.0 x 1.2 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25879117
- Part Description: 2010 Cadillac Escalade ESV Wiper Arm
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
$38.60 MSRP:$69.87You Save: $31.27 (45%)
OEM (Genuine) 2010 Cadillac Escalade ESV Wiper Arm
PartNumber: 22917501
Product Specifications- Notes: 2nd Design
- Location: Passenger Side
- Other Names: Front Arm, Wiper Arm
- Item Dimensions: 4.0 x 27.0 x 0.9 inches
- Item Weight: 1.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25879116
- Part Description: 2010 Cadillac Escalade ESV Wiper Arm
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
$38.58 MSRP:$69.84You Save: $31.26 (45%)
OEM (Genuine) 2010 Cadillac Escalade ESV Rear Arm
PartNumber: 15277756
Product Specifications- Other Names: Front Transmission, Rear Arm, Wiper Arm
- Item Dimensions: 2.4 x 18.4 x 1.8 inches
- Item Weight: 0.90 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Rear Arm
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
FAQ for Windshield Wiper Arms Repair
Q: What should be done for the rear window wiper arm park ramp?
A:
You should align the pin in the rear of the ramp to the hole in the liftgate outer panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the windshield washer arm nut?
A:
The recommended torque is 35 Nm (26 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the windshield wiper arm?
A:
You should open the hood to access and remove the wiper arm assembly, and then remove the windshield wiper blade from the windshield wiper arm and transfer it to the new wiper arm.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the rear window wiper arm?
A:
You should electrically cycle the wiper arm to the mid-wipe position on the rear window before the wiper arm nut cap removal, and then clean the knurls on the rear wiper motor pivot shaft after the rear wiper arm has been removed.
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the rear window wiper arm parking ramp?
A:
You should open the liftgate, and then remove the interior liftgate trim panel.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear window wiper arm nut?
A:
The recommended torque is 9 Nm (80 LB in).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear window wiper arm park ramp nut?
A:
The recommended torque is 9 Nm (80 LB in).
By Bob
GM Specialist
01/11/2022See more FAQs (2)