< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
TPMS Sensors
- Department
- Brands
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Sensor
PartNumber: 13540600
Product Specifications- Notes: Cadillac
- Replaces: 13598771, 25799331, 13586335, 15825475, 15922396, 20923680, 25920615, 22853741, 23445327, 15254101
- Part Description: 2010 Cadillac Escalade ESV Sensor
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$56.45 MSRP:$106.52You Save: $50.07 (48%)
Dorman® Tpms Sensor for 2010 Cadillac Escalade ESV
PartNumber: 974-009Product Specifications- Maximum Pressure Reading: 40 PSI
- OE Part Number: 10394110, 12768826, 13586335, 15268606, 15825475, 15921013, 15922396, 20922900, 20923680, 20925924, 22853741, 22854866, 25920615, 25952370, 43130-85Z00, 43130-85Z03, 15254101, 25799331, 15123145, 15202272
- UPC: 019495230236
- Valve Color: Silver
- Valve Length: 0.50 in
- Part Description: 2010 Cadillac Escalade ESV Tpms Sensor
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | All Engines
$34.13
Denso® TPMS Sensor for 2010 Cadillac Escalade ESV
PartNumber: 550-2400Product Specifications- Notes: 315 MHz, Snap In, 11.5 in-lbs, 1.3 N.m; OE Manufactured
- Gasket or Seal Included: YES
- Monitor Type: Direct
- Mounting Hardware Included: YES
- Mounting Method: Snap In
- Power Source: Electric
- Real Time Pressure Signal Transmission: YES
- Universal Or Specific Fit: Specific
- UPC: 042511218116
- Part Description: 2010 Cadillac Escalade ESV TPMS Sensor
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | All Engines
FAQ for TPMS Sensor Repair
Q: What is the proper way to install the tire pressure indicator sensor?
A:
The proper way is to assemble the tire pressure sensor to the valve stem and install the new TORX screw and tighten it to 1.3 Nm (11.5 lb in), apply tire soap to the rubber portion of the valve stem, pull the valve stem through in a direction parallel to the valve hole on the rim, and then install the tire/wheel assembly on the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the tire pressure indicator sensor?
A:
The procedure is to remove the tire/wheel assembly from the vehicle, remove the TORX screw from the tire pressure sensor and pull it straight off the tire pressure valve stem, and then remove the tire pressure valve stem by pulling it through the rim.
By Bob
GM Specialist
02/11/2022