< Back ×
My Vehicle Change Vehicle
2010 Cadillac Escalade ESV
< Back to View All
Steering Arms, Links & Rods
- Department
- Series
- Brands
- Prices
OEM (Genuine) 2010 Cadillac Escalade ESV Rod Kit, Steering Linkage Outer Tie
PartNumber: 15254061
Product Specifications- Notes: 1/2 Ton; Escalade Esv
- Location: Driver Side; Passenger Side
- Other Names: Outer Tie Rod
- Item Dimensions: 6.1 x 5.7 x 5.1 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2010 Cadillac Escalade ESV Rod Kit, Steering Linkage Outer Tie
Vehicle Fitment- 2010 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
$102.60 MSRP:$178.59You Save: $75.99 (43%)
Delphi® Outer Steering Tie Rod End for 2010 Cadillac Escalade ESV
PartNumber: TA2788Product Specifications- Adjustable: No
- Bearing Material: Plastic
- Color: Black
- Dust Boot Included: Yes
- Dust Boot Material: CR
- End 1 Gender: Female
- End 1 Thread Diameter: 16.00
- End 1 Thread Direction: Clockwise
- End 1 Thread Pitch: 1.5
- End 2 Gender: Male
- End 2 Thread Diameter: 14.00
- End 2 Thread Direction: Clockwise
- Finish: Chrome Plating
- Grade: Standard
- Greasable: No
- Grease Fitting Included: No
- Height: 105.00
- Housing Material: Steel
- Item Grade: Standard Replacement
- Length: 162.00
- Length Stud Center to End: 141.00
- Mounting Hardware Included: Yes
- Pre-Greased: No
- Stud Type: Threaded
- Tie Rod Material: Steel
- UPC: 689604270325
- Weight: 1.278668
- Width: 43.00
- Part Description: 2010 Cadillac Escalade ESV Outer Steering Tie Rod End
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | All Engines
$17.51
Centric® Premium™ Front Inner Steering Tie Rod End for 2010 Cadillac Escalade ESV
PartNumber: 612.66043Product Specifications- UPC: 805890804963
- Part Description: 2010 Cadillac Escalade ESV Premium™ Front Inner Steering Tie Rod End
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | All Engines
$27.10
Centric® Premium™ Front Outer Steering Tie Rod End for 2010 Cadillac Escalade ESV
PartNumber: 612.66044Product Specifications- UPC: 805890804970
- Part Description: 2010 Cadillac Escalade ESV Premium™ Front Outer Steering Tie Rod End
Vehicle Fitment- 2010 Cadillac Escalade ESV | All Trims | All Engines
$16.75
FAQ for Tie Rod End Repair
Q: What should be done before replacing the rear axle tie rod?
A:
You should raise and support the vehicle.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the steering linkage inner tie rod?
A:
The proper way is to attach the steering linkage inner tie rod onto the steering gear rack, place a pipe wrench on the flats on the steering gear rack next to the steering linkage inner tie rod, tighten the steering linkage inner tie rod, and then install the steering gear boot.
By Bob
GM Specialist
01/11/2022Q: How many bolts does the rear axle tie rod mounting have?
A:
The rear axle tie rod mounting has 2 bolts.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the Steering Linkage Inner Tie Rod Nut?
A:
The recommended torque is 75 Nm (55 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the steering linkage outer tie rod nut?
A:
The recommended torque is 60 Nm (44 LB in).
By Bob
GM Specialist
01/11/2022Q: What should be done before replacing the steering linkage outer tie rod?
A:
You should remove the front tire and wheel assembly.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the steering linkage inner tie rod?
A:
The procedure is to remove the steering gear boot, place a pipe wrench on the flats on the steering gear rack next to the steering linkage inner tie rod, place a wrench on the flats of the steering linkage inner tie rod, and then rotate the steering linkage inner tie rod counterclockwise while holding the steering gear rack stationary until the steering linkage inner tie rod separates from the steering gear rack.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the rear axle tie rod mounting bolt?
A:
The recommended torque for the rear axle tie rod end bolt attached to the frame is 85 Nm (63 LB ft).
By Bob
GM Specialist
01/11/2022See more FAQs (3)