2010 Cadillac Escalade ESV Air Bag Clockspring

The procedure is to remove the steering wheel, remove the steering column shroud, remove the inflatable restraint steering wheel module coil retaining ring and discard it, and then remove the inflatable restraint steering wheel module coil from the steering shaft.

The proper way is to slide the inflatable restraint steering wheel module coil onto the steering shaft, install the steering column shroud, and then install the steering wheel.

The procedure is to remove the wire harness strap or straps where necessary, hold the SIR coil and look at the side with the letters POM, rotate the coil hub clockwise until the coil ribbon stops, rotate the coil hub slowly counterclockwise approximately 3.3 turns, use the lock pin to lock the SIR coil in the center position, hold the SIR coil in the center position, align the SIR coil with the horn tower and slide the SIR coil onto the steering shaft assembly, and then route the wires up against the steering column. One wire harness strap will surround one lead from the coil to the steering column.